Water changing in overflow box.

endlessrealm

Active Member
View Badges
Joined
Sep 15, 2022
Messages
336
Reaction score
49
Location
United states
What state or country do you live in
Massachusetts
Rating - 0%
0   0   0
Hello, i own the waterbox infinia 190.5 tank. And i suspected some fluctuation in my overflow box. First i thought they are because the mp40s changing the flow. But it does seem its a different issue. I decided yesterday to turn off the wave makers completely. Set the red knob the water level exactly under my emergency pipe small increments. And i made sure it was exactly under the emergency pipe.

Woke up the next day, and it was down by few inches. Im confused wheres that inconsistency coming from? My m2 pump is calibrated, and set at 50%. Is my valve broken? I am not sure anymore.
 
You may want to clean your valve (if it's been a while), but whenever you make a small adjustment it can take 10-15 minutes to see the net results in the overflow. I'd try making small (1/8 to 1/4 turn) adjustments, waiting 10-15 minutes between additional changes.

You could also look at your ATO setup.
 
fluctuations in your return chamber changes the pressure on the pump, it makes adjusting for silent operation a pain in the backside...
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.3%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.8%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.1%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.8%
  • I keep a backup of everything

    Votes: 24 25.8%
  • Other (Post in the comments)

    Votes: 7 7.5%
Back
Top
Home
Post thread…
Market
What's new