Waveline WavePuck II - IN STOCK!

Discussion in 'SaltwaterAquarium.com' started by SaltwaterAq, Nov 29, 2017.

  1. SaltwaterAq

    SaltwaterAq Active Member R2R Supporter Gold Sponsor

    Mar 6, 2014
    Likes Received:
    In stock and Shipping NOW!


    Max Flow 3,000gph | 30~3 watts | 25-150+ gallons

    Includes pump, power supply, 0-10v cable and multi-function controller.
    Applicable for glass or acrylic aquariums up to 3/4 in thick.

    Compact & Controllable Water Movement
    • Generates a 30in Wide and Gentle Flow Pattern
    • Directional Water Flow
    • Energy Efficient
    • Quiet Opperation
    • 0-10v Advanced System Control
    • No Hassle Installation
    • Magnetic Articulating Magnetic Mount
    The new Waveline WavePuck is a fully controllable flow pump that moves up to 3000gph and consumes no more than 30 watts of power in the process. The broad flow water movement will encourage coral growth instead of blasting it away with harmful "hot spots" associated with other wave pumps.

    Get Flow Where You Need it the Most
    With it's unique articulating magnetic mount, the WavePuck can easily get the flow precisely where you need it. The rear of the WavePuck has a convex rounded shape which fits neatly into a concave mounting magnet, allowing the pump assembly to gyrate in any direction. The WavePucks's low-profile magnetic mount offers a 25 degree range of motion and the entire pump is capable of rotating 360 degrees!

    Multi-Function Controller
    The WavePuck Multi-Function Controller allows you to create pulsing or surge effects with its easy to set waveline mode as well as the expected feed mode. Simply set your desired max power/flow setting and its on and off power cycles. You can also set the pump run time to facilitate night mode by shutting the pump down till the run time resumes.

    Advanced VDM WavePuck Control
    For all those that desire more control, the WavePuck can link up to most 3rd party controllers by using an available 0-10 volt port. This makes the pump very versatile and almost universally compatible with most system controllers including the APEX by Neptune Systems or the Reef Angel among others.

    WavePuck Specifications
    AC Adapter: Input: A.C. 100~240V, 50/60Hz; Output: DC 24V, 1.5A
    Max Power: 30W
    Max Flow: 3000gph (1100LPH)
    Size: 3in x 2.8in (DxH)
    Cable Length: 10.5ft (from pump to controller)
    Max Mounting Width: 3/4in

  2. siggy

    siggy Well-Known Member R2R Supporter Build Thread Contributor Partner Member 2018

    Feb 16, 2017
    Likes Received:
    Chesterfield Michigan
    I been thinking about this one since Reefbuilders article. has anyone used one or any waveline controller on a pump
  3. Rakie

    Rakie Federal Coral Reserve R2R Supporter R2R Excellence Award SCMAS Member Build Thread Contributor

    Feb 10, 2017
    Likes Received:
    Southern California
    Yeah the numbers are good, just need to see it in action and a couple reviews.
Draft saved Draft deleted

Share This Page