What is your favorite sump brand?

  • Thread starter Thread starter TheHarold
  • Start date Start date
  • Tagged users Tagged users None

TheHarold

5000 Club Member
View Badges
Joined
Oct 3, 2015
Messages
5,174
Reaction score
8,516
Rating - 0%
0   0   0
Hello people of R2R!

I am shopping for a 36” sump, and there seems to be a billion options out there. Bashsea, Crystal Reef Aquatics, Advanced Acrylics, Trigger Systems, etc.

I was wondering if anyone had some feedback on their sump. My requirements are 3 1” inputs, an area to put floss (whether in filter cup or a tray), and dosing tube holders.

I think the strongest competitors are the @Crystal Reef Aquatics SRS36” and the Trigger System’s @MarineDepot 36” sump. However both of these are pushing the budget, at $600, and I can’t find any feedback online.

Here is the @Crystal Reef Aquatics one.

Benefits:
Looks amazing
Fits all requirements
Has a great area for floss

Drawbacks:
Does NOT come with any lid to reduce salt creep.
r5FFHk9.jpg


And here is the Trigger Systems @MarineDepot sump.

Benefits:
Comes with lids to reduce salt creep
Fits all requirements

Drawbacks:
Less sexy
Less optimal floss setup
hm1UsqU.jpg
 
Have you checked out fijicube.com?

No I had not! At $450, 25% less than the previous models I listed, that is more budget friendly for sure. The only downside I see is that the inputs are 1.25” and I am using 1” , though I suppose they may be willing to modify that for me.

If I had not already bought modular marine overflow, I may have gone with one of those combos! It certainly would have been nice to know about

’ll post a photo below:

qTGqTtE.png
 
Check out Geo's Reef he has some really nice sumps and will build custom of what you want.
 
Check out Geo's Reef he has some really nice sumps and will build custom of what you want.

Certainly nice, but the majority of the sumps are out of my budget. The 36R, at $600+ shipping, would be the comparable model. I would need 3 1” drains rather than the 2 he provides, but I suppose he could add that in?

Picture below:
SD4VyoQ.jpg
 
For off the shelf I was impresses with the skimz units I have used. Of course my favorite has easily been a rubbermaid stock tank! For smaller systems vertex somatic have also been pretty good.
 
No I had not! At $450, 25% less than the previous models I listed, that is more budget friendly for sure. The only downside I see is that the inputs are 1.25” and I am using 1” , though I suppose they may be willing to modify that for me.

If I had not already bought modular marine overflow, I may have gone with one of those combos! It certainly would have been nice to know about

’ll post a photo below:

qTGqTtE.png

I am using their overflow and sump on my 93 and it has been great!
 
For off the shelf I was impresses with the skimz units I have used. Of course my favorite has easily been a rubbermaid stock tank! For smaller systems vertex somatic have also been pretty good.

I don’t need the integrated 3g ATO reservoir in the SKIMZ sumps
 
I’ve looked at that Trigger/Marine Depot sump, but it has that weird end chamber. It’s either too small of an ATO reservoir or a refugium where you’d have to reroute your plumbing.

 
I’ve looked at that Trigger/Marine Depot sump, but it has that weird end chamber. It’s either too small of an ATO reservoir or a refugium where you’d have to reroute your plumbing.



Isn’t that rightmost end chamber just for your return pump?
 
I went thru this issue last year, I went with Precision Marine R36 Pro Plus. I bought from them which after a discount code + shipping came to $505.50. it was well packed, has 3 inputs, 2 7" filter socks, probe holders ect. It has plenty of room for a large skimmer & return pump, I didn't want a built in ATO container. Post 1 & I think 3 of my build thread have pretty good pictures of it. (I only used 2 inputs, 3rd I just have going into the skimmer section as it hopefully will never have water in it.
https://www.reef2reef.com/threads/basement-im-100-ext.577496/#post-6118333
 
I have a trigger systems, 34" sump. Even though it is nice, the niceness is unnecessary. If I was going to do it again, I would not have spent the money on a pretty one. Different colors, fancy routing, etc. I would actually go with a custom one, with fully removable lids. Each manufactured one has a drawback that I would eliminate. IE. the dosing ports on mine are on the wrong side of the sump for my set up.
 
Those are some slick looking sumps - almost a shame to get them wet :D. I've always just made my own, but might go commercial next time …. well, if there is a next time.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new