So, i am wondering when would be the right time to start dosing, something like AFR or Two Part.
Up to now i just dosed Alk as needed with Balling Light KH, which was not too much. But now that my few corals started to grow more, i go through 0.5 dKh of Alk a day.
I also noticed just recently that my calcium and magnesium are starting to lower. I was always around 1440 for mag, and 430 for calcium. Weekly water change always kept up with it so far. Now, when i tested yesterday, one day before waterchange, the mag and calcium were lower. Not very much, but still a bit. Before they were always stable on those numbers. Now they were 1340 for mag (-100 ppm) and 390 for calcium (-40 ppm).
Attached is also the trace elements from my last ICP (almost 2 months ago).
Its in german, sadly i cant change it. But the order is:
Zinc
Vanadium
Copper
Nickel
Molybdenum
Barium
Cobalt
Chrome
Iron
Lithium
Manganese
Selenium
Everything is too low, according to the icp, except vanadium which is ok, and iron which is too high. I already found the suspected culprit for the iron, which was my glass heater. It had a leak and water got inside, already got it replaced.
Not sure if the trace elements are important for the corals i have right now, or what the consequence of it being low is. The only one i know is manganese for gonioporas.
Also have a stylophora, duncan, frogspawn, acan, favia, zoas, symphyllia, caulastrea, blaso, fungia, capnella and a big leather.
When would be the right time to consider dosing more of an all for reef, which as far as i know also contains some trace elements?
Chemistry is really not my strong point, so really looking forward for any help!
Thank you!
Up to now i just dosed Alk as needed with Balling Light KH, which was not too much. But now that my few corals started to grow more, i go through 0.5 dKh of Alk a day.
I also noticed just recently that my calcium and magnesium are starting to lower. I was always around 1440 for mag, and 430 for calcium. Weekly water change always kept up with it so far. Now, when i tested yesterday, one day before waterchange, the mag and calcium were lower. Not very much, but still a bit. Before they were always stable on those numbers. Now they were 1340 for mag (-100 ppm) and 390 for calcium (-40 ppm).
Attached is also the trace elements from my last ICP (almost 2 months ago).
Its in german, sadly i cant change it. But the order is:
Zinc
Vanadium
Copper
Nickel
Molybdenum
Barium
Cobalt
Chrome
Iron
Lithium
Manganese
Selenium
Everything is too low, according to the icp, except vanadium which is ok, and iron which is too high. I already found the suspected culprit for the iron, which was my glass heater. It had a leak and water got inside, already got it replaced.
Not sure if the trace elements are important for the corals i have right now, or what the consequence of it being low is. The only one i know is manganese for gonioporas.
Also have a stylophora, duncan, frogspawn, acan, favia, zoas, symphyllia, caulastrea, blaso, fungia, capnella and a big leather.
When would be the right time to consider dosing more of an all for reef, which as far as i know also contains some trace elements?
Chemistry is really not my strong point, so really looking forward for any help!
Thank you!
