20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
I wanted to run this idea by you guys:
Switching to sump. I wanna try and ditch HOB filter and go with a sump for a multitude of reasons. However I have 0 idea how sumps work and how I'd set one up. How exactly would I do this? I already have an idea of a Fiji 20 gallon sump. Just make it simple. Im tired of HOB because I seem to not be getting good results etc. As I've matured I've realized that hob was a shortcut as a kid. I wanna keep the Remora though, no point in buying an in sump skimmer.
You will need to get an overflow and return plumbed in. If the tank isnt set up with a built in one, you can get a hang on overflow. I dont have any recommendations there though as i have never used one. You could do a diy one if you are comfortable drilling glass and can take stuff out of your tank to work on it.
Then the returns, you can build out of pvc that hang on the edge of the tank, or i think there are some kits to buy that do the same. I like vcs's rfg nozzles and would recommend those. Also recommend some piece of flexible tube between the return pump and the tank, it will cut vibration way down. I also stuck a silicon pot holder under my pump, with those 2 things, it is dead silent. Then you just need to work out what all you want in the sump. Socks, heaters, a refugium chamber, ats, etc.
 
You will need to get an overflow and return plumbed in. If the tank isnt set up with a built in one, you can get a hang on overflow. I dont have any recommendations there though as i have never used one. You could do a diy one if you are comfortable drilling glass and can take stuff out of your tank to work on it.
Then the returns, you can build out of pvc that hang on the edge of the tank, or i think there are some kits to buy that do the same. I like vcs's rfg nozzles and would recommend those. Also recommend some piece of flexible tube between the return pump and the tank, it will cut vibration way down. I also stuck a silicon pot holder under my pump, with those 2 things, it is dead silent. Then you just need to work out what all you want in the sump. Socks, heaters, a refugium chamber, ats, etc.
Good morning! Sorry if you already posted it but did your parents give you a first name when you were born? 😉
 
welcome @Red_Beard !
good news this morning. the kitty was waiting for us outside the door this morning! my husband brought it in and put it in bed with its little owner 😊 . so glad! she was so sad last night she couldnt choke down her dinner.
 
Sure.

Aqua Rocks Design

I buy them direct. I was planning to buy a couple more this week or next but between the unscheduled ER visit and the unplanned rock-into-the-windshield of the Porsche. It looks like Black Friday for anything tank related. Too bad, I had a pretty good shopping cart of goodies planned.
I like that aqua rock tower. would look cool all torches.
Well it's been a rough week, its almost done and start fresh this weekend!
 
welcome @Red_Beard !
good news this morning. the kitty was waiting for us outside the door this morning! my husband brought it in and put it in bed with its little owner 😊 . so glad! she was so sad last night she couldnt choke down her dinner.
This is wonderful news! So glad it found its way back home!
 
welcome @Red_Beard !
good news this morning. the kitty was waiting for us outside the door this morning! my husband brought it in and put it in bed with its little owner 😊 . so glad! she was so sad last night she couldnt choke down her dinner.
So glad to hear Jill!
 
Thanks Tom, hold your horses, rock through the windshield? What happened? On a side note, your priorities are backwards, reefing before health, da.
hold GIF
Not through it. We had the car out for its constitutional and a gravel truck, with large gravel in it, decided to aim some at our windshield. Put a ten inch crack in the lower part in front of the driver. I'm not going to mess with the insurance because they want to send a kid-that-couldn't-get-a-job-at-MickeyDs with a generi-shield to my house. I like to keep the Porsches original so a couple grand and a 50 mile trip when I'm allowed to drive again.
 
Good morning! Sorry if you already posted it but did your parents give you a first name when you were born? 😉
2 actually. My name is Izaac, they spelled it with a 'z' so i could go by zack as a nickname, but that never really took hold.
 
Not through it. We had the car out for its constitutional and a gravel truck, with large gravel in it, decided to aim some at our windshield. Put a ten inch crack in the lower part in front of the driver. I'm not going to mess with the insurance because they want to send a kid-that-couldn't-get-a-job-at-MickeyDs with a generi-shield to my house. I like to keep the Porsches original so a couple grand and a 50 mile trip when I'm allowed to drive again.
After all, there’s no substitute! Sorry Tom that sucks.
 
2 actually. My name is Izaac, they spelled it with a 'z' so i could go by zack as a nickname, but that never really took hold.
I like it, thanks for sharing Zack ( see it’s already taking hold on this thread)!
 
I wanted to run this idea by you guys:
Switching to sump. I wanna try and ditch HOB filter and go with a sump for a multitude of reasons. However I have 0 idea how sumps work and how I'd set one up. How exactly would I do this? I already have an idea of a Fiji 20 gallon sump. Just make it simple. Im tired of HOB because I seem to not be getting good results etc. As I've matured I've realized that hob was a shortcut as a kid. I wanna keep the Remora though, no point in buying an in sump skimmer.
You're going to need an overflow. You can DIY or buy an external overflow easier than drilling your tank. Buying or building an acrylic one will look cleaner.

That's the first step. Calculate the flow you want through the sump and then match the overflow to that - example: if you get the one that comes with a filter roller it's 1600 gph max. Get an overflow that can handle 1200-1500 gph to maximize the roller or go closer to 1000 to save on the roller mat.

Next, get a return pump to match that flow. If the overflow is 1000 gph, go with a 1200-1500 gph return pump and either reduce the flow on a DC model or bypass some flow with a Tee and a valve and put it back to the sump (we can discuss further later if you want).

After that, plumb it up and get ready to go!

Figure out what you want in the sump (socks, roller mat, biomedia, refugium...). You don't need a separate skimmer section if you're going to continue running the Remora so a 3 chamber works or a four chamber if you want a refugium and biomedia.
 
Speaking of Aquarocks, I have this one (but in white)

1755791860335.jpeg

You can't see it in my tank because it currently has Birdsnest encrusting almost the entire thing...
 
They are actually very easy to setup. First off, is your tank drilled for an overflow?
sorry still in school. No drill no nothing just a regular tank.
 
welcome @Red_Beard !
good news this morning. the kitty was waiting for us outside the door this morning! my husband brought it in and put it in bed with its little owner 😊 . so glad! she was so sad last night she couldnt choke down her dinner.
something you might want to try. find a treat that she absolutely loves. (dehydrated chicken?), and shake the box every time you give it to her or ring a bell etc... Wherever the are they come running when they hear that sound. They do offer GPS chips now too so you'd know where they are but the treat thing they will come to whomever makes that sound.
 

TOP 10 Trending Threads

WHICH AREA OF REEFKEEPING MOST NEEDS A GENUINE BREAKTHROUGH?

  • Lighting

    Votes: 3 4.3%
  • Pumps and water flow

    Votes: 2 2.9%
  • Water testing and monitoring

    Votes: 22 31.9%
  • Controllers, apps, and device compatibility

    Votes: 8 11.6%
  • Filtration and nutrient export

    Votes: 1 1.4%
  • Automatic feeding

    Votes: 7 10.1%
  • Leak prevention and tank safety

    Votes: 7 10.1%
  • Equipment reliability and repairability

    Votes: 15 21.7%
  • Other (leave a comment in the thread)

    Votes: 4 5.8%
Back
Top
Home
Post thread…
Market
What's new