I have the BRS 4 stage RO/DI value plus system. I want to replace anything that I should replace on a regular basis, so my question is are there any recommended replacement kits or any preferred DI resin? Should I stick with the standard 5 micron sediment filter and 5 micron VOC carbon block?
BTW I get over 90psi pressure when I turn the valve on to start making water. I have to cut the manual inlet valve back just to get the pressure under the max pressure of 90psi.
Im also thinking of adding the water saver to this, what exactly does that piece do besides speeding up water production?
just want to make sure my water being used in my aquarium is as good as it gets.
Dale
BTW I get over 90psi pressure when I turn the valve on to start making water. I have to cut the manual inlet valve back just to get the pressure under the max pressure of 90psi.
Im also thinking of adding the water saver to this, what exactly does that piece do besides speeding up water production?
just want to make sure my water being used in my aquarium is as good as it gets.
Dale