48 Fiji Cube
- Build Thread
- Thread starter dangit
- Start date
- Tagged users None
OP
OP
dangit
Active Member
The mandarin has been doing great! I regularly add copepods to the tank so he always has plenty to eat. I buy in bulk online sometimes but also pick pods up at the lfs every couple weeks.
Gumbies R Us
Certified Noob
Tank looks like it is doing great!
OP
OP
dangit
Active Member
Wow can’t believe it’s been over a month since my last post… work has been too busy.
Tank is still doing well. Had a huge battle with cyano, but I think I’ve finally beat it. While battling cyano my phosphates jump so working to bring those back into the .1-.2 window. Corals are still alive, but I need to get my nutrients back under control so they can thrive. I’ll try to get an update picture of the tank soon…
Fish are still happy with the tank… Planning on adding a few more fish here soon once they wrap up QT at the Queen City Corals. They now have a full QT system so I no longer have to do it myself.
Giving the tank a few weeks to get the nutrients under control then I’m going to look into filling the tank in with more corals.
Tank is still doing well. Had a huge battle with cyano, but I think I’ve finally beat it. While battling cyano my phosphates jump so working to bring those back into the .1-.2 window. Corals are still alive, but I need to get my nutrients back under control so they can thrive. I’ll try to get an update picture of the tank soon…
Fish are still happy with the tank… Planning on adding a few more fish here soon once they wrap up QT at the Queen City Corals. They now have a full QT system so I no longer have to do it myself.
Giving the tank a few weeks to get the nutrients under control then I’m going to look into filling the tank in with more corals.
OP
OP
dangit
Active Member
While I've been neglecting this thread, I haven't been neglecting my tank 
Uploading a new video of the tank today. Decided to quit fighting the sand and let it do what it wants... I like the look of it and it's much better for my acans. Everything has been looking good except for for the yellow goni... its only been like that for a few days so hopefully it will come back out.
Waiting on a few fish to finish QT. Will update once the new fish arrive.
Uploading a new video of the tank today. Decided to quit fighting the sand and let it do what it wants... I like the look of it and it's much better for my acans. Everything has been looking good except for for the yellow goni... its only been like that for a few days so hopefully it will come back out.Waiting on a few fish to finish QT. Will update once the new fish arrive.
OP
OP
dangit
Active Member
Thank you! I’ll be adding a melanurus wrasse first and then I a few anthias… they all need to finish QT and the wrasse is a little ahead. Hoping to add the wrasse towards the end of the month and the anthias in June
OP
OP
dangit
Active Member
Been working on a few sump/plumbing upgrades to help out with tank maintenance and making my life a little bit easier… I added black to tint to some of my sump cover panels to help with unwanted algae growth in the sump…
I added two little magnetic lights to the top of the cabinet area which will detect motion and automatically turn on/off. The magnets let me take the lights down to recharge easily.
Got a new ATO system and let me tell you the size difference compared to the Apex ATO system is insane… this sensor and pump are tiny. I was a little skeptical it would work well but it has. This is the Hydros triple water sensor ATO which hooks up to my Hydros x10 sense port and the pump to the drive port.
Decided to remove the dual return pump setup and got a Vectra s2 pump and changed the plumbing layout.. This was not a fun change and will not be doing another plumbing change on this tank lol. I will say the use of unions was HUGE… This would‘be been 100x worse if I didn’t have unions everywhere. The UV sterilizer is still at work and I have a ball valve to adjust flow level.
There is still a small leak but I need a new bulkhead and barbed fitting to fix it… one is on the way and will be here soon!
Sal 1.025
Alk 9.1
Cal 460
Nitrate 5
Phosphate .23
Mag 1450
My nutrients are back under control… still working on getting that ideal balance of Nitrate and Phosphate, but at this point I feel it’s safe to add more fish and corals… QT is almost done and will update then!
I added two little magnetic lights to the top of the cabinet area which will detect motion and automatically turn on/off. The magnets let me take the lights down to recharge easily.
Got a new ATO system and let me tell you the size difference compared to the Apex ATO system is insane… this sensor and pump are tiny. I was a little skeptical it would work well but it has. This is the Hydros triple water sensor ATO which hooks up to my Hydros x10 sense port and the pump to the drive port.
Decided to remove the dual return pump setup and got a Vectra s2 pump and changed the plumbing layout.. This was not a fun change and will not be doing another plumbing change on this tank lol. I will say the use of unions was HUGE… This would‘be been 100x worse if I didn’t have unions everywhere. The UV sterilizer is still at work and I have a ball valve to adjust flow level.
There is still a small leak but I need a new bulkhead and barbed fitting to fix it… one is on the way and will be here soon!
Sal 1.025
Alk 9.1
Cal 460
Nitrate 5
Phosphate .23
Mag 1450
My nutrients are back under control… still working on getting that ideal balance of Nitrate and Phosphate, but at this point I feel it’s safe to add more fish and corals… QT is almost done and will update then!
OP
OP
dangit
Active Member
Screenshot of the Corvalvue Hydros app. Pretty straight forward and simple to use. Pretty quick and easy to setup a device and keep it going.
When the Hydros Maven comes out, I will probably pick that up for automated testing and dosing. Planning to add a salinity probe around then as well.
JustAnotherNanoTank
Well-Known Member
- Joined
- Jun 29, 2019
- Messages
- 611
- Reaction score
- 945
Your tank is amazing! Excited to follow along. I started my Fiji 32EXT a few months ago and I’m doing a lot of stuff similar to you. Check it out if you have a chance!
Similar threads
New Jersey New York Drygoods SOLD
Fiji Cube 22.2 EXT with Advanced Sump 15, Stand, return pump, heater, cover
- Price: $300 obo
- Shipping NOT Available
