Anemone not eating not sticky!?

[Nano925]

There is nothing you can do but just sit back and keep a close eye on it. Don’t try to rip it off anything. If anything run your finger on its foot and massage it slowly to try and get it off never pull it. Just watch it closely and make sure it doesn’t die. Keep us posted! Try and leave the pump off for a little while and let it attach if you can or make sure the water flow is not too strong near where it is resting.

 

[Nem1clownfish2]

The clownfish don't seem to be bothering it right now.

 

[Nem1clownfish2]

I will thankyou everyone!

 

[carpetlover]

Carbon pellets will absorb anything nasty that was leeched into your water. Shredded anemone water can kill your clownfish pretty quickly if no water change/carbon is done. Speaking from experience. Search ‘activated carbon’

 

[Nano925]

Carbon pellets will absorb anything nasty that was leeched into your water. Shredded anemone water can kill your clownfish pretty quickly if no water change/carbon is done. Speaking from experience. Search ‘activated carbon’

I would also suggest doing a water change and changing out all your filter media and I second the activated carbon.

 

[Nem1clownfish2]

The anemone is opening nicely.

 

[GoReefin]

The anemone is opening nicely.

Hopefully he settles down soon. Just leave him be for now.

 

[Nem1clownfish2]

It is looking better.

 

[Nem1clownfish2]

Thanks

 

[carpetlover]

If your DT water looks cloudy/murky, do a large water change immediately. Very important

 

[Nem1clownfish2]

What do the carbon pellets look like?

 

[carpetlover]

What do the carbon pellets look like?

 

[dedragon]

any activated carbon usually works petco is probably cheapest place to get it fast

 

[dedragon]

make sure you rinse it first though in rodi before you place in tank

 

[Nem1clownfish2]

Does this tank look cloudy\murky to you?

 

[Nem1clownfish2]

I already have carbon pellets I think? Does this look like carbon pellets? If so then I already have it in the tank.

 

[GoReefin]

Yep that's carbon pellets. You can use a pair of panty hose to hold them in and put them in your tank.
Don't forget to rinse the pellets prior to adding to your tank.

 

[Nem1clownfish2]

Aright thanks

 

[Nano925]

Does this tank look cloudy\murky to you?

Just a sidenote keep your glass magnet cleaner away from the sand bed because sand can get under it and scratch your tank. I use a pad to clean near the sand bed. Just my two cents hope this helps.

 

[Nem1clownfish2]

Ok thanks.