Anenome troubles

  • Thread starter Thread starter Reefer678
  • Start date Start date
  • Tagged users Tagged users None

Reefer678

New Member
View Badges
Joined
Sep 28, 2021
Messages
2
Reaction score
0
Location
Fairfax
What state or country do you live in
Virginia
Rating - 0%
0   0   0
I got a larger tank and cycled for a few months and all of my other corals are doing just fine. The new tank has a higher ph of around 8.3 where as the old tank had about 8, old talk was also salter at 1.030... anyways

The tank has new lights, steves LED's for redsea 130D. I am not sure what settings are best for the rbta. The new only really puffs up at night and during the day shrinks down a bit. It hasn't looked like a bubble tip in a while.

Day 1, had some trouble moving and a tear on the foot. Resumed to bubbly after tear.
Day 2-5 hid under rock shelf with low light.
Day 6 ,7 moved nem to low part of tank in light. New eats at night but spits out during day. Mouth open

8+ Tried moving nam to higher in tank for more light. Same earing behavior. Mouth open

Anyone know what I can feed it that it will keep? I usually feed some raw shrimp.

Params:
Sal 1.026
Ph 8.2
Cal: 430
Mag: 1300
Phosphates: 0-.25
Kh : 140
Nh4: 0
N02: 0
N03: 0
 
Are you using api test kits? I suspect false readings on nitrate and ammonia
Moderate light and water flow
 
Stop moving it and trying to feed it. They don’t need feeding and it is stressful on their systems when they are already stressed out. Just give it some time.
 
Your nutrients are too low bta like dirtier water you need some phosphates and nitrates. Leave the anemone alone it will find its own place. That’s your problem guaranteed. Make sure you have an area with more flow, the anemone will find it. If it doesn’t like it it will find a little less flow. I have a supernova and Chicago Sunburst in 2 separate tanks and have been Aqua culturing rainbows for 3 years. You don’t need to feed it wait until it’s settled in. When an anemone is repairing itself it will hide. It will do it on its own. Make sure you’re using rodi water and increase nitrates
Hope This Helps
 
I would also suggest having your lfs double check your phosphate level, if it's api 0-25 it's hard to say what you really have if anything over 0. They aren't known for accuracy. Kh 140? Sounds odd. Make sure to acclimate it to your lights then get it on a proper setting, from what I read and notice with mine, anything meant for sps should work well for bta's as well. My rbta's are liking the sps 1:4 schedule, 80%Royal blue, Cool Blue, Violet, 20% Red, Green, White.
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 16 21.9%
  • Powerheads or wavemakers

    Votes: 5 6.8%
  • Sump or rear filtration chambers

    Votes: 10 13.7%
  • Skimmer or other filtration equipment

    Votes: 9 12.3%
  • Overflow or plumbing

    Votes: 12 16.4%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 20 27.4%
  • Other—tell us what I missed

    Votes: 1 1.4%
Back
Top
Home
Post thread…
Market
What's new