Another Red Sea Failure...Viewer Discretion Advised

Well, since I am the OP, figured I would share this...so it begins...


Wow! Your brother's Red Sea failed last month. And now your one is seam-failing too!

Given enough time, I think every single Red Sea G1 and G2 seam will fail. What a crap show! This company should be facing a class action by now. Yet, they take zero responsibility! I have stopped using anything Red Sea. Salt, additives, equipment...
 
Wow! Your brother's Red Sea failed last month. And now your one is seam-failing too!

Given enough time, I think every single Red Sea G1 and G2 seam will fail. What a crap show! This company should be facing a class action by now. Yet, they take zero responsibility! I have stopped using anything Red Sea. Salt, additives, equipment...
Same, I got rid of everything with their name on it. Couldn't stand it.
 
Yep just replaced my Red Sea reefer g1 350 after my seam started splitting guess I was one of the lucky ones because my tank lasted 9 years but I refused to buy another reefer! A nice Eshopps with M130 with 3/4” glass is in its place now!!
IMG_2795.jpeg


And Eshopps m130
IMG_4487.jpeg
 
Yep just replaced my Red Sea reefer g1 350 after my seam started splitting guess I was one of the lucky ones because my tank lasted 9 years but I refused to buy another reefer! A nice Eshopps with M130 with 3/4” glass is in its place now!!
IMG_2795.jpeg


And Eshopps m130
IMG_4487.jpeg

Mine failed in that same corner, luckily caught it before it totally went. Got a UNS 150



c8cae142-3664-46b4-a585-2cb493db7850.jpg
 
As OP, will also provide a quick update. Red Sea sent me out a replacement tank under warranty, but I quickly sold it and setup a UNS 150 as well:

G3 350 replacement tank (replacing my G2, but sold it instead):

1788363946058.jpeg



My UNS 150:

1788364021989.jpeg


My brother's tank (the original video with the failure that started this thread) was replaced with a UNS 150 Peninsula (he picked up the "special edition" color scheme):

1788364188657.jpeg


We've enjoyed the UNS systems so far!
 
That seam failure is nothing short of a crying shame. 😭
 
A LFS’s seam. They still have this tank like this. There is literally water just hanging out in the seam. I do not know how it’s still holding! I press the seam and you can see the water moving around to the bottom of that tank! 🤯😱

It’s a 250g2+ I think.


IMG_2816.jpeg
 
A LFS’s seam. They still have this tank like this. There is literally water just hanging out in the seam. I do not know how it’s still holding! I press the seam and you can see the water moving around to the bottom of that tank! 🤯😱

It’s a 250g2+ I think.


IMG_2816.jpeg

My LFS has a S1000 that has the top left seam going out like my 525XL did lol.
 
@Z Burn's Reefing Those uns look really nice! What’s the total volume on those? I went with the Eshopps m130 after seeing the 3/4” glass and bottom eurobeacing and they were running a sale I couldn’t pass up 4th of July! But if they didn’t have that deal going I would have gotten the uns 150
 
@Z Burn's Reefing Those uns look really nice! What’s the total volume on those? I went with the Eshopps m130 after seeing the 3/4” glass and bottom eurobeacing and they were running a sale I couldn’t pass up 4th of July! But if they didn’t have that deal going I would have gotten the uns 150

The 150 is a 150 gallons, same one I just got too. Very nice compared to all these partical board brands.
 
So, uh, when you guys sell your replacement Red Sea tanks do you warn the buyers or just tell them it'll look great with their new hardwood floors?

I wouldn't warn them. Should have done research before buying
 
That seam failure is nothing short of a crying shame. 😭
RS has no shame or conscience, it's strictly about $.

So, uh, when you guys sell your replacement Red Sea tanks do you warn the buyers or just tell them it'll look great with their new hardwood floors?
I would be honest and tell them it was a warranty replacement and leave it at that.

I didn't wait for my 300 to fail even though it was still under warranty. I repurposed the stand and sump and now have a 40g breeder with sump.
 
RSR owner here…for those who upgraded/replaced their RSR are there any tanks where you can still use the RSR stand??
Not really… the RS tanks are metric dimensions, usually a tad shorter than standard imperial dimension tanks… (for example, my R450 is 59.1”x19.7” in footprint… I’m building a nice hardwood and Birch ply 60”x20” stand for it which is designed to be expanded in depth in the event that I ever want to put an imperial dimension tank in the same spot!)

You could modify the RS stand to be a bit larger, though!
 
RSR owner here…for those who upgraded/replaced their RSR are there any tanks where you can still use the RSR stand??

40 breeder on a reefer 300 stand and hob plumbed to RS sump. It was about 1/2" short and probably would have been fine since the 40 is a rimmed tank but I added a 3/4" board since I had one here.

PXL_20260810_000100701~2.jpg


An IM20 AIO was nice fit in my reefer 170 stand.

image.jpg


PS I have no intention of going for strike 3!
 
So, uh, when you guys sell your replacement Red Sea tanks do you warn the buyers or just tell them it'll look great with their new hardwood floors?
I sold a brand new replacement tank. Warn them of what? Red seas reputation? I’m confused.
 
I sold a brand new replacement tank. Warn them of what? Red seas reputation? I’m confused.

I would say it’s what that post is asking. Simple answer from me nope haha.

I ended up going that direction with the convo and the person that bought my 250g2+ ended up didn’t care, he made his own conclusions about the ordeal. Luckily only paid $1650 for mine, new from the shop, in all actuality I made more. Sold it for 2350 with a used S2 vectra, and a radion xr30 g4. These items were purchased used. I made an extra $300 on my setup I sold haha. I’ll take it.

But if the buyer does not do their homework, I’m not in the businesses of spoon feeding everyone info that is easily researched. Had I not been able to sell it, I might have setup the tank for QT. Haha. It would have been my loss.
 
I would say it’s what that post is asking. Simple answer from me nope haha.

I ended up going that direction with the convo and the person that bought my 250g2+ ended up didn’t care, he made his own conclusions about the ordeal. Luckily only paid $1650 for mine, new from the shop, in all actuality I made more. Sold it for 2350 with a used S2 vectra, and a radion xr30 g4. These items were purchased used. I made an extra $300 on my setup I sold haha. I’ll take it.

But if the buyer does not do their homework, I’m not in the businesses of spoon feeding everyone info that is easily researched. Had I not been able to sell it, I might have setup the tank for QT. Haha. It would have been my loss.
yea, I sold him a brand new tank for $800. Maybe that's worth it to him, knowing the G3s could be just as bad? I don't know. I don't think it's my job to try and predict the future for someone else's decision.

The stand was used, so he knew it was a warranty replacement, but we discussed it and he didn't care. I still wouldn't warn them of anything if the display is brand new in the box. That is like a car salesman telling the new buyer the motor could blow in a few years. Certainly, if the specific tank had known defects I was aware of, I would make that clear before selling, but trying to communicate that Red Sea doesn't have the greatest track record to a potential buyer seems a little much....I suppose if the failure rate hits 80+% then maybe, ethically, I'd have to start saying something, lol.
 

TOP 10 Trending Threads

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 15 31.9%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 6 12.8%
  • It depends on whether my nutrient export can handle it

    Votes: 6 12.8%
  • It depends on how badly I want the fish

    Votes: 11 23.4%
  • Not much. I’m willing to adjust my routine

    Votes: 9 19.1%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 8 17.0%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 2 4.3%
  • I haven’t really considered this before

    Votes: 4 8.5%
  • Something else (see my comments in the thread)

    Votes: 1 2.1%
Back
Top
Home
Post thread…
Market
What's new