Any electricians? Tripping circuit?

reefsponge

Well-Known Member
View Badges
Joined
Oct 12, 2008
Messages
630
Reaction score
386
Rating - 100%
1   0   0
So I have been coming home to my tank not running in my new residence. All the same equipment is being used that I had on a 15 amp circuit in my previous home.
In the current residence I am using 2 GFCI outlet receptacles on a 15 amp eaton AFCI breaker in the box. I have noticed the circuit to be tripping not to long after the 400w halide comes on.
An amp meter was placed at the breaker box with all electricity on and during the firing of the 400w halide. It peaked at just a little bit over 8 amps.
Where am I going wrong here? The ballast is fine, as my temporary solution is plugging the halide into another circuit. This is being done by a bright orange extension cord crossing the living space and my wife has been giving me the evil eye because of. Please help me solve this.
 

KSzegi

Valuable Member
View Badges
Joined
Mar 10, 2011
Messages
1,036
Reaction score
18
Location
Ocala, FL
Rating - 0%
0   0   0
When I switched back over to the 400w halides .... had the same problem on a 20 amp breaker - even when only running the light on the circuit. Ended up having to replace the breaker with a non-gfi one .... only use it at the outlet now.
 

Papadovak

Active Member
View Badges
Joined
Feb 22, 2014
Messages
167
Reaction score
2
Location
Okc OK
Rating - 0%
0   0   0
Yea I think it's something with the gfci on the arc fault breaker you could change the arc fault breaker to a regular one as long as the ampacity is the same as the arc fault breaker
 

Papadovak

Active Member
View Badges
Joined
Feb 22, 2014
Messages
167
Reaction score
2
Location
Okc OK
Rating - 0%
0   0   0
But the arc fault is super sensitive so maybe when the lamps kick on it trips the afci breaker
 
OP
OP
reefsponge

reefsponge

Well-Known Member
View Badges
Joined
Oct 12, 2008
Messages
630
Reaction score
386
Rating - 100%
1   0   0
The GFCI is not tripping at the receptacle, it is the AFCI tripping the circuit at the breaker box.

The circuit is for the room, which is basically just the tank components and ceiling light for electrical.

By changing out the 15 amp AFCi at the breaker box for a single pole 15 amp breaker, is their any consequences I should be nervous about?
 

Papadovak

Active Member
View Badges
Joined
Feb 22, 2014
Messages
167
Reaction score
2
Location
Okc OK
Rating - 0%
0   0   0
No I wouldn't worry about it. The afci is only used by if the 2011 electric code. We change them all the time bc people call us for their vacuum tripping the afci. Kind of pointless if you ask me :)
 

badfish2

New Member
View Badges
Joined
Mar 19, 2014
Messages
14
Reaction score
0
Location
Richmond, VA
Rating - 0%
0   0   0
That could be really debated. Some people really like them for fire reasons.

GFCI should keep you and your tank safe. I personally wouldn't want AFCI on my tank because of phantom trips and how sensitive they are.

If your not running cheaper equipment like oddysea, I think you'll be fine pulling the AFCI offline. They didn't become code for bedroom wiring until mid 2000s.
 

badfish2

New Member
View Badges
Joined
Mar 19, 2014
Messages
14
Reaction score
0
Location
Richmond, VA
Rating - 0%
0   0   0
Haha. Va was always a decade behind on adopting code too!! We were in 2005 a few months ago and just phasing into 2008 if I'm not mistaken.
 

fanandy8

Community Member
View Badges
Joined
Apr 16, 2010
Messages
52
Reaction score
1
Location
NW Ohio
Rating - 0%
0   0   0
We just did an addition to our house with two bedrooms had to put the arc fault breakers in and they trip all the time. I'm going to have a friend that's electrician come switch them for me. I'd just switch out the arc fault breaker for a regular one it prob won't trip anymore.
 

Reefing Madness

Moderator
View Badges
Joined
Oct 27, 2012
Messages
20,032
Reaction score
7,281
Location
Peoria, AZ.
Rating - 0%
0   0   0
Old circuit breakers will trip out before hitting limit. Change the breaker out.
 

trido

Valuable Member
View Badges
Joined
Apr 22, 2010
Messages
1,636
Reaction score
1,035
Location
Lynnwood, Washington
Rating - 0%
0   0   0
Old circuit breakers will trip out before hitting limit. Change the breaker out.

That was my first thought too. An old breaker can get weak and trip long before it reaches capacity on rare occasion. I've replaced only three that were questionable in the last decade on different jobs. I definitely would change out an Arc Fault Breaker for any reef tank. A GFCI is plenty of protection and in some cases even then too sensitive for reef tank use. Lighting is sometimes one such case.
 

Reefing Madness

Moderator
View Badges
Joined
Oct 27, 2012
Messages
20,032
Reaction score
7,281
Location
Peoria, AZ.
Rating - 0%
0   0   0
That was my first thought too. An old breaker can get weak and trip long before it reaches capacity on rare occasion. I've replaced only three that were questionable in the last decade on different jobs. I definitely would change out an Arc Fault Breaker for any reef tank. A GFCI is plenty of protection and in some cases even then too sensitive for reef tank use. Lighting is sometimes one such case.
Totally agree with this.
 

TOP 10 Trending Threads

DO YOU THINK TECHNOLOGICAL ADVANCEMENTS ARE MORE HELPFUL OR HURTFUL TO REEFING?

  • More helpful.

    Votes: 42 40.4%
  • More hurtful.

    Votes: 4 3.8%
  • I think it depends mostly on the technology.

    Votes: 41 39.4%
  • I think it dependsmostly on the reefer behind the technology.

    Votes: 33 31.7%

New Posts

Back
Top
Home
Post thread…
Market
What's new