Here are some of mine. I've added comments to the programming after the semicolons
White LED variable output
Fallback OFF
Set OFF
If Sun 120/000 Then W_Sun; uses W_Sun profile to dim LEDs over 2 hours for sunrise and sunset that changes with the seasons. It's delayed 2 hours from actual sunrise/sunset
If Outlet W_On = ON Then ON; high noon effect
If Outlet LED_10K = ON Then LED_100; changes lighting for 10,000K look if variable is set
If Outlet LED_14K = ON Then LED_100; changes lighting for 14,000K look if variable is set
If Outlet LED_20K = ON Then LED_50; changes lighting for 20,000K look if variable is set
White LED power outlet
Fallback OFF
Set OFF
If Sun 120/119 Then ON
If Power Apex Off 015 Then OFF; turns off lights if power is off for longer than 15 minutes
Blue LED variable outlet
Fallback OFF
Set OFF
If Sun 090/120 Then B_Sun; uses B_Sun profile to dim LEDs over 30 minutes for sunrise and sunset that changes with the seasons. It's delayed 2 hours from actual sunrise/sunset
If Outlet B_On = ON Then ON; keeps LEDs on at 100% after sunrise
If Outlet LED_10K = ON Then LED_50; changes lighting for 10,000K look if variable is set
If Outlet LED_14K = ON Then LED_100; changes lighting for 14,000K look if variable is set
If Outlet LED_20K = ON Then LED_100; changes lighting for 20,000K look if variable is set
Blue LED power outlet
Fallback OFF
Set OFF
If Sun 090/134 Then ON
If Power Apex Off 015 Then OFF; turns off lights if power is off for longer than 15 minutes
Outlet W_On; variable outletto let the white LED dimmer know when to have it on 100% (noon effect)
If Sun 240/000 Then ON
Outlet B_On; variable outlet to let the blue LED dimmer konw when to have it on 100%
If Sun 105/120 Then ON
Heater outlet
Fallback OFF
Set OFF
If Temp < RT+-1.0 Then ON
If Temp < 40.0 Then OFF; temp sensor normally reads 20 degrees when it fails
Skimmer outlet
Fallback ON
Set ON
If Power Apex Off 001 Then OFF; turns skimmer off if power has been off longer than a minute
If Outlet Return_Pump = OFF Then OFF; turns skimmer off if return pump is off
If Outlet Skimmer_Full = ON Then OFF; turns off if skimmer cup is full
If Outlet ATO = ON Then OFF; turns off when ATO is on (kalk in ATO sometimes makes it overflow)
If FeedA 060 Then OFF
If FeedB 060 Then OFF
If FeedC 010 Then OFF
If FeedD 010 Then OFF
Defer 005:00 Then ON; stays off for at least 5 minutes
AutoFeeder
Set OFF
Fallback OFF
If Time 13:00 to 13:05 Then ON; turns on feeder every day at 1:00pm
Fan
Fallback OFF
Set OFF
If Temp > RT+1.0 Then ON; turns on fan if temp is more than 1 degree over seasonal temp
Min Time 010:00 Then OFF; keeps fan on for at least 10 minutes
ATO; topoff water pump.. note that topoff water contains KALK
Fallback OFF
OSC 000:00/002:00/005:00 Then ON; turns on ATO every 5 minutes for 2 minutes unless one of the following is true
If Outlet Water_Low = OFF Then OFF; if water in sump is at proper level it doesn't turn on
If FeedC 000 Then OFF; if cleaning tank it doesn't turn on
If Outlet Return_Pump = OFF Then OFF; if the return pump is off it doesn't turn on
If Outlet Water_High = ON Then OFF; if the high water failsafe switch is on it doesn't turn on
IIf pH > 8.50 Then OFF; if sumps pH is over 8.5 it doesn't turn on
Min Time 002:00 Then ON; keeps it on for at least 2 minutes
Vortech master; Vortech MP10wES controlled by through the WXM
Set Nutrient; normal mode is nutrient export
If Time 08:00 to 10:00 Then ReefCrst; run reef crest for 2 hours in the morning
If Time 19:00 to 21:00 Then ReefCrst; run reef crest for 2 hours in the evening
If Time 21:30 to 06:00 Then Night; night mode at night
If Outlet Feeder = ON Then ON; if autofeeder is on, put on pumps at 100% so they have to chase food
If FeedA 000 Then Nutrient
If FeedB 000 Then ON
If FeedC 000 Then OFF
If FeedD 000 Then Nutrient
If Power Apex Off 000 Then Night; if power goes out, pumps lower to 50% power
Vortech slave; Vortech MP10wES controlled by through the WXM
Set Sync; normally is in sync mode with master pump to create waves
If Time 08:00 to 08:05 Then AntiSync; change it up to antisync a few times a day for random water motion
If Time 17:30 to 18:35 Then AntiSync
If Time 20:30 to 21:35 Then AntiSync
If Outlet Feeder = ON Then ON
If FeedA 000 Then Slow
If FeedB 000 Then ON
If FeedC 000 Then OFF
If FeedD 000 Then Sync
Email; sends an email and text if one of the following happens
Fallback OFF
Set OFF; outlet is normally off
If Outlet Water_Low = ON Then ON; if water in sump is low
If Time 23:00 to 06:30 Then OFF; does not text or email when I'm asleep!
If Temp > RT+2.0 Then ON; sends if temperature is more than 2 degrees over seasonal temp
If Temp < RT+-2.5 Then ON ; sends if temperature is lower than 2.5 degrees below seasonal temp
If Temp > 82.5 Then ON; sends if temp is greater than 82.5
If pH < 07.70 Then ON; sends if pH is too low
If pH > 08.70 Then ON; sends if pH is too high
If ORP < 200 Then ON; sends if ORP is too low
If ORP > 500 Then ON; sends if ORP is too high
If Power EB8_3 Off 000 Then ON; sends if power goes out
If Power Apex Off 000 Then ON; sends if power goes out
If FeedC 000 Then OFF; overrides the previous if I'm cleaning tank
Defer 010:00 Then ON; state must be in ON position for more than 10 minutes before warning is sent
If Temp < 40.0 Then ON; sends if temperature probe has failed
If Outlet Water_High = ON Then ON; sends if sump is near overflowing
If Outlet Skimmer_Full = ON Then ON; sends if skimmer cup is full
