ATI Results question

  • Thread starter Thread starter Lolleo
  • Start date Start date
  • Tagged users Tagged users None

Lolleo

Active Member
View Badges
Joined
Jan 24, 2021
Messages
203
Reaction score
113
Location
USA
What state or country do you live in
Washington
Rating - 0%
0   0   0
So I just got my ATI results as my tank over the past months has been having issues like lots of algae, bad coral growth (Due to doser malfunction *recent), and mainly just random issues like always testing high for phosphates which seems to be true.

In terms of the results of the tank, it returned mainly high phosphates (0.34 mg/l) and phosphorus(110.5 µg/l) Nitrates (0 mg/l) and high silicon (2279 µg/l) and high calcium of 660 (which is due to my doser sadly)

I get my RO water from my local fish store and it seems that the RO water has some elements in it that ATI doesn't like to see are these things that normally show up in RO or should they be gone as I thought RO/DI when done "correctly" meant that there were 0 particles/TDS in it.

RODI Results

Silicon12246 µg/l0 µg/l+12246 µg/l
Barium5.70 µg/l0 µg/l+5.70 µg/l
Chrome4.06 µg/l0 µg/l+4.06 µg/l
Copper4.05 µg/l0 µg/l+4.05 µg/l
Phosphorus65.70 µg/l0 µg/l+65.70 µg/l
Phosphate0.20 mg/l0 mg/l+0.20 mg/l
 
Yeah, stop using the LFS water immediately. They clearly aren't watching their filters and your tank is paying the price.

BRS has some of their RO units on sale. Well worth it to make your own water.
 
I'm not sure the water is a big problem, but I agree that it may not be 0 ppt TDS water and making your own is always a good plan.

Did they measure other ions like sodium, chloride, calcium, et/?

That will help you know if it was 0 ppm TDS.
 
I'm not sure the water is a big problem, but I agree that it may not be 0 ppt TDS water and making your own is always a good plan.

Did they measure other ions like sodium, chloride, calcium, et/?

That will help you know if it was 0 ppm TDS.

I'd be more worried about the 12,000 silica, 65 phosphorus, and .20 phosphates. It's clear filters aren't being replaced
 
I'm not sure the water is a big problem, but I agree that it may not be 0 ppt TDS water and making your own is always a good plan.

Did they measure other ions like sodium, chloride, calcium, et/?

That will help you know if it was 0 ppm TDS.
05FDB94B-4DDC-45D3-BFF0-96C77FC1AAB5.png
 
I'd be more worried about the 12,000 silica, 65 phosphorus, and .20 phosphates. It's clear filters aren't being replaced

i was asking about the others to get an idea of what’s going on, not because I am worried about chloride.

Thst said, unless he has problematic diatoms, the Si and P values may not be troublesome.
 

Very strange set of readings. I think that can only come about (if accurate) when a DI is first depleting, and the incoming ions like sodium and chloride are displacing the silicate attached to the di that accumulated over time, but it depleted recently ennough that none of those ordinary tap water ions are making it through the di yet.
 
Winner for highest Si result I've seen on a test.
May not be an issue, but I'd look for another source of water.
 
Winner for highest Si result I've seen on a test.
May not be an issue, but I'd look for another source of water.
My first win I guess lol. But ya I am going to install my own RODI system and make it myself as I already make my own salt so why not.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new