Can't Unscrew RODI Canisters

  • Thread starter Thread starter KVYA
  • Start date Start date
  • Tagged users Tagged users None
Finally I got them open. Once I pushed down on my float valve and tried to open it, i got it open no problem. I gues I thought since it was a float valve all the water would flow out. Thanks a lot
Yep - relieving he pressure makes all the difference in the world. You must have your system plumbed with the waste water going through the ASOV valve.
 
I think I mentioned doing this way back on the first page of the thread. Easy step to overlook but really makes a difference.
 
Reviving a dead thread here but sweet goodness I can’t get these things off. I was able to get one carbon block off but my DI, sediment, and other carbon block are immovable. Using the wrench, the metal connecting it to the wall is bending before these things will let loose. I will try getting a strap wrench but any other suggestions? BRS just tightens them up too much.
 
Reviving a dead thread here but sweet goodness I can’t get these things off. I was able to get one carbon block off but my DI, sediment, and other carbon block are immovable. Using the wrench, the metal connecting it to the wall is bending before these things will let loose. I will try getting a strap wrench but any other suggestions? BRS just tightens them up too much.
I said it before, but they are dead easy to remove with a bench vice- just stick the canister in the vice and turn the rest of the assembly
 
I got the same issue but mine is not mounted. The strap wrench finally help me open the DI canister.
Btw.. if you havent bought the strap wrench. Make sure you buy a decent one.. the cheap one from lowes doesnt help me. LoL
 
Last edited:
Lube your orings every time you change filters, and tighten by hand only. If the housing still leaks, it is time for a new oring.
 
Last edited:
Reviving a dead thread here but sweet goodness I can’t get these things off. I was able to get one carbon block off but my DI, sediment, and other carbon block are immovable. Using the wrench, the metal connecting it to the wall is bending before these things will let loose. I will try getting a strap wrench but any other suggestions? BRS just tightens them up too much.
Sometimes for me, I’ll use the wrench BRS includes, turn the wrench to loosen until it won’t turn anymore, and then whack the wrench with a mallet to turn it more
 
Try one of these! I have a pair

79AF6EC3-2AB5-4D66-8ADD-147B0EAB9338.jpeg
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 14 34.1%
  • I’d trust someone who knows my tank to choose

    Votes: 1 2.4%
  • I’d rather get a gift card and pick it myself

    Votes: 14 34.1%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 12 29.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new