Confusing Par Readings, please help.

Ann Enomy

Active Member
View Badges
Joined
Oct 4, 2019
Messages
119
Reaction score
106
What state or country do you live in
New York
Rating - 0%
0   0   0
I an setting up a 210 gallon (72x24x30) reef tank and have 3 G6 Radion XR30's mounted on a RMS rail. I got a Chinese par meter from amazon for $150 and am getting 700 par at the surface of the water but drop down to 170 6" deep and 75 at 12" deep, and around 50 from 18-28" deep running AB+ at 100%. New tank, New water, just moved fish over a few days ago and have not started moving corals yet.

These readings don't make sense to me. Especially since most run the radions at 40%. Is it most likely a crappy meter or do these readings make sense?
 
Is the sensor submerged near the top of the water? I don't think they work well in air. I'd try it a couple inches below the water, see if that helps.
 
This might be a silly question, but is the PAR meter corrected for LED light? As I recall manufacturers had to adapt them to properly measure light from LED fixtures.
 
This might be a silly question, but is the PAR meter corrected for LED light? As I recall manufacturers had to adapt them to properly measure light from LED fixtures.
Some years ago I had an older Apogee that did not play well with LED lights. If the OP has what I think they have, it should work reasonably well for LED lights. I believe they have something like this VBR PAR meter from Amazon. In the product description it compares itself to the "famous XX-510" PAR meter. That, I'm quite sure, would be the Apogee 510, which does handle LED lights.

VBR PAR meter on Amazon
 
This is the Par meter I have. It does not mention LED light calibration in the manual or description of product so that might be what is going on. And yes these measurements were taken under water. Just saw huge drop off in par from just under the surface to 6" below on pristine water so I feel like something fishy is happening.
 
I don’t have experience with that exact meter but Ryan and I tested a couple Amazon PAR meters over on Serious Reefs. We found both needed a correction factor of 1.35x to match the Apogee 510

That doesn’t really answer the quick fall off question but there could also be an issue with that sensor not reading well in water
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 26.0%
  • I’d trust someone who knows my tank to choose

    Votes: 4 5.5%
  • I’d rather get a gift card and pick it myself

    Votes: 28 38.4%
  • I’d prefer gear or supplies instead

    Votes: 2 2.7%
  • Please don’t surprise me with livestock

    Votes: 20 27.4%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new