Cracked

jetskiwilly

Community Member
View Badges
Joined
Nov 4, 2021
Messages
83
Reaction score
33
Location
Charlotte
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
Purchased a new tank that was built wrong. Thinking I could remove over flow glass, install bulkhead and reset glass I cracked the tank. Went at it for an hour with razor but one side is to tight to get razor in. So thought I would hit it from the outside with torch and burn off the silicone. I went hard with the heat and snap, glass cracked.

is it trash? How am I going to remove this over flow to get bulkhead in?

first thought is to add support glass to inside and outside, but crack is at the return bulkhead. Best bet would be install bulkhead at the same time I add support glass.

4717A2D2-77DB-4166-85EC-CCCA173F2704.jpeg 50A988D6-9DCD-45BE-BF08-8481CFF9DB40.jpeg C2EAF7F1-4AA2-45D6-B7EC-FD2288BC1FB3.jpeg
 
Purchased a new tank that was built wrong. Thinking I could remove over flow glass, install bulkhead and reset glass I cracked the tank. Went at it for an hour with razor but one side is to tight to get razor in. So thought I would hit it from the outside with torch and burn off the silicone. I went hard with the heat and snap, glass cracked.

is it trash? How am I going to remove this over flow to get bulkhead in?

first thought is to add support glass to inside and outside, but crack is at the return bulkhead. Best bet would be install bulkhead at the same time I add support glass.

4717A2D2-77DB-4166-85EC-CCCA173F2704.jpeg 50A988D6-9DCD-45BE-BF08-8481CFF9DB40.jpeg C2EAF7F1-4AA2-45D6-B7EC-FD2288BC1FB3.jpeg
Unfortunatey, panel will need to be replaced. When you apply bulkhead, it may crack some more
 
Considering I couldn’t get the overflow glass out, don’t think I’m cut out to replace the glass. Has the additional black aluminum? bracing around top and bottom for added work. I wanna hit my big toe with a hammer so I can cry and move on.
 
Yep, trashed unfortunately. It will spread once stressed with something like water or moving most likely.
 
Purchased a new tank that was built wrong. Thinking I could remove over flow glass, install bulkhead
Correct me if I'm wrong, you tried to remove the glass overflow because the bulkhead didn't fit ?
You could've reverse the bulkhead, put the threaded end through the glass and tighten it then
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 28.4%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.0%
  • I’d rather get a gift card and pick it myself

    Votes: 25 37.3%
  • I’d prefer gear or supplies instead

    Votes: 2 3.0%
  • Please don’t surprise me with livestock

    Votes: 19 28.4%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new