- Joined
- Nov 30, 2017
- Messages
- 771
- Reaction score
- 930
What is the name of the newtwork? I don't see anything close to Archon?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's just called Archon. If you don't see it, try refreshing your wifi available connections list, or reboot the ArchonWhat is the name of the newtwork? I don't see anything close to Archon?
First push the reset button on the Archon for 10 seconds to reset it to setup modeI rebooted the Archon and keep refreshing on my laptop and the Mac and still nothing. Im going to try and restart my router and see if that works.
First push the reset button on the Archon for 10 seconds to reset it to setup mode
Is your Archon close enough to your router to be able to read the signal?Ok going to try that now. Restarting the router did nothing.
After you enter your wireless ip configuration, write down the new ip address. It's going to boot you out. After it does, reconnect to your internet wifi connection and navigate to the assigned ip addressThe reset worked. Im in on my Mac. Thank you!!!
The DCI is just a adapter. What ports do you have the DCI hooked too? Are they on the Archon or an APC module?
Look for function "APC WaveMaker"I plugged it into the 0-10v because that is where it fit. The pump into the DCI and the the power for the pump from the DC to channel 1 on a PB4.
Look for function "APC WaveMaker"
Was that a 0-10v output on the Archon itself or the 0-10v output of a APC module. You have to program the port the DCI is plugged into and not the DCI. The DCI just converts the 0-10v output to 0-24v.
The APC function dosen't work on the Archon outputs only the APC module. That is why I was asking which output the DCI is connected.