DIY Diatom Filter for under $100.00

  • Thread starter Thread starter Paul B
  • Start date Start date
  • Tagged users Tagged users None
Dustinc, that looks perfect. It just needs a base or that pipe will break between the canister and pump and that wouldn't be pretty. :oops:
 
It does have an air bleed on top. The air bleed makes it much easier to empty the thing when it is finished. But there are still some miner things to work out.

There is a screw inside that holds that bleeder valve in and it will rust badly so I need to replace that with stainless steel. All the screws that hold the device to the mounting, whatever I decide to build it out of will also be stainless steel. But for now, I am still in the testing and tweeking stage. :beaming-face-with-smiling-eyes:

I am also having huge back, disk problems and have a problem standing, sitting, breathing, eating etc so I am working slower. I see a huge back surgery in my near future, Remember my wife has MS and can't do much so I have to do just about everything and my filter work suffers.

I get up at 4:30 or 5:00 to start my day so I can get everything done that is simple for most people.
Hi just reading through all of this. I am hoping I se a final product at the end one thing I find 1 micron filters on amazon but very expensive. As to your back I bought a treadmill to deal with other health issues that I wont bother you with, but I have fused spine not from an operation from stupidity when young any way it really does good things for my back. $400 of amazon was a very good investment. I got it for breathing. Better to try than the alternative you are avoiding and I don't blame you
 
Gbroadbridge, inside the pleated filter cartridge is a rigid plastic cage that keeps the filter from collapsing. But I will see how it behaves when it gets clogged. I am waiting for the 5 micron filter cartridge coming today.

Steve, that is correct as I have 5 of them. But this one with the 30 micron filter doesn't even get a chance to coat the filter as the pores are to big. I will experiment with the 5 micron filter.

This is all just a new prototype and will require a lot of tweeking. I made probably one or two dozen Majano Wands before I settled on the design that I was allowed to get a patent for.

I acquired a half size model so while I am tweeking the larger one, I will design a smaller one for a smaller tank. These prototypes are just for design ideas. I am not sure yet if I can get the correct cartridge for the smaller one.

IMG_1827.JPG


I also found a material for the base that is cheap, available and all plastic. I will use that for future models of this project.
Ok I came late but where did the rigid plastic cage come from. I have a Marineland water polisher with exactly that inside its filter so I know what you mean but don't know where to buy one
 
Debra, my favorite person who reads all my nonsense. Building fish stuff is easy, show your husband some of my "important" stuff. :beaming-face-with-smiling-eyes:





This one was bought by someone on another forum. :)


This one is similar'


I built and sold almost 40 of these and similar ones. :D

I still have the top two devices if you want one 90% discount. :beaming-face-with-smiling-eyes:

I also have never hired anyone for anything except dentists because I can't stand my screaming. I built the 3 kitchens and bathrooms in my last house, raised the dormer and installed a new heat system and re wired the house. I used to do all that as side jobs for many years and find it fun.

This diatom filter thing is fun and probably because of PTSD I can't turn off my mind and need to build or invent so trying to fall asleep is an adventure that is normally futile. :confused:

Mickey, as you found out, you can't use food grade diatom powder in this thing. The easiest thing to do is build this device and just use the one micron cartridge. I have been using powder since the 60s so I am used to it, and I have a lot of the stuff.

I find it fascinating building stuff like this even though it is harder to do it as I want. But eventually I may have to resort to using it that way. But anyone can do that so it is no challenge.

I give up what are they ?
 
Sure you can. The output is 1/2" which silicone tubing can be aimed anywhere. Could also just aim the unit as I did yesterday on a deep clean converting one failed experiment back to a just a tank with fish for the grandson. The direction nozzle can be removed.

71oxiVABgVL._AC_SL1500_.jpg
So What about the input? I want to clean the sand. Or do you just stir it up and let the filter pick it up?
 
I received all the parts to build the small diatom filter. This one will be rather expensive because the "frame, supports and base" will be 1/2" acrylic sheet. One square foot of the stuff is about $25.00 and each filter uses one square foot.

This one is just for me to experiment but if I ever made any more I don't think I would use acrylic just for the cost. But I like it so much better than any other material and it looks like jewelry. :D
If you know people use the material they use for the boards in a hockey rink
 
I give up what are they ?
They are just Steam Punk art pieces. They don't do anything useful and are just to look at. I built and sold 40 of them mostly in New York and Manhattan, some in California, Mississippi and Arkansas.

So I already have one of these how would you convert it?
I don't know but I doubt they are very powerful
 
So What about the input? I want to clean the sand. Or do you just stir it up and let the filter pick it up?
Intake on the plastic container therefore need to stir the sand by pointing the output at it how I've done it or add tubing and place in one corner and then use tubing to stir as needed. Could just use another powerhead to stir as well.
 
So I already have one of these how would you convert it?
Doesn’t need to be converted, it does the same thing in a different way. It works great- yes you would just stir it up and any particles it grabs will get trapped. Priming them with DE is tedious but with just the filter works great. IMHO the DIY version here is a touch better in that once it’s primed you have a vacuum attachment you can use to collect (until it jams your pump :) )

For the marineland one, I used to stir up the sump and keep it running with the return off. it would do the bulk of the cleaning.
 
Doesn’t need to be converted, it does the same thing in a different way. It works great- yes you would just stir it up and any particles it grabs will get trapped. Priming them with DE is tedious but with just the filter works great. IMHO the DIY version here is a touch better in that once it’s primed you have a vacuum attachment you can use to collect (until it jams your pump :) )

For the marineland one, I used to stir up the sump and keep it running with the return off. it would do the bulk of the cleaning.
I am after the stuff in my sand and trying not to make a big mess. Look at Garriga's answer to me a video link goes through all that to add the earth its dead easy
 
I use 5 microns on the larger one that I use diatom powder with just like the old Vortex. But with these models, you can't just put the powder in the canister like we used to do. There is no tube going down to the bottom so the powder will just sit there like a lump and not coat the membrane. You have to start the filter using a container in your tank so the top of the container is over the surface of the water. pour the powder into that container. After it runs clear and the powder is on the membrane, carefully remove the container by sinking it.

You just backflush that one to clean it just like the Vortex. No need to do anything crazy, it cleans perfectly and you end up with a new filter. Just connect the outflow hose to your sink or hose.

I probably have a picture on here someplace.

The smaller unit I built has a one micron element in it that is not pleated and you don't put powder in that one. You just run it like that. You can backflush it but almost nothing comes out so you need to run it in a container with some "Regular" bleach. No scents or no splash. It should be regular as those other bleaches are deadly poisonous. Personal experience.

I would not put a tube in like the old diatoms. I tried and there just isn't enough room even for 1/4" tube. It isn't needed and runs and starts very easy just as I said.
What is the ratio of powder to water?
 
I don't know, I add about a cup and a half of powder to the thing.
 
Hi just reading through all of this. I am hoping I se a final product at the end one thing I find 1 micron filters on amazon but very expensive. As to your back I bought a treadmill to deal with other health issues that I wont bother you with, but I have fused spine not from an operation from stupidity when young any way it really does good things for my back. $400 of amazon was a very good investment. I got it for breathing. Better to try than the alternative you are avoiding and I don't blame you
To further because of skepticism I still like walking outdoors. Although my wife had to teach me how to do it properly by her **** leader Look ahead of yourself at about a stop sign height maybe 500 yards ahead to keep proper posture and not slump. If you get a treadmill you will find it gives you better Core strength. A person like you can picture the different positions you a
can achieve with something like this. It even can help to align your spine. You can even add grips to give you better positions . Not by them but by you. look at the angle advantage of one to pinpoint an area
 
I do 5 minute warm up and now 30 minutes on top at 3.3 MPH whicvh for me converts to 5 K an hour for 30 minutes. Not an all cure but has improved my sleep time until I wake up from pain. At least I know I wont have to go under the knife at 70 obviously your older by a bit
 
Just ordered everything I need for your cleaner. Was looking through your book about Aquariums I want to start a new tank Third. Do you have more detailed photos of your gravel filter? Maybe a source for the substrate needed?
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 22 26.5%
  • I’d trust someone who knows my tank to choose

    Votes: 8 9.6%
  • I’d rather get a gift card and pick it myself

    Votes: 30 36.1%
  • I’d prefer gear or supplies instead

    Votes: 2 2.4%
  • Please don’t surprise me with livestock

    Votes: 21 25.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new