D's homemade AIO 40 gallon

[D'sreef]

Photo update this week

 

[nfaber]

Hi D,

Could you link me to the type of PVC sheet you bought? I tried starting a similar build using acrylic sheets from Amazon, but I've butchered them. I like the look of the PVC you used.

 

[D'sreef]

Hi D,

Could you link me to the type of PVC sheet you bought? I tried starting a similar build using acrylic sheets from Amazon, but I've butchered them. I like the look of the PVC you used.

This is the one I used, but I would suggest using thicker. Also would suggest using bulkheads on the return.

https://www.homedepot.com/p/Veranda-1-4-in-x-24-in-x-4-ft-White-Reversible-PVC-Trim-Sheet-H060XWS6/312995340

 

[nfaber]

This is the one I used, but I would suggest using thicker. Also would suggest using bulkheads on the return.

https://www.homedepot.com/p/Veranda-1-4-in-x-24-in-x-4-ft-White-Reversible-PVC-Trim-Sheet-H060XWS6/312995340

Noted on the bulkheads.

What did you use to cut it?

 

[D'sreef]

This is the one I used, but I would suggest using thicker. Also would suggest using bulkheads on the return.

https://www.homedepot.com/p/Veranda-1-4-in-x-24-in-x-4-ft-White-Reversible-PVC-Trim-Sheet-H060XWS6/312995340

Noted on the bulkheads.

What did you use to cut it?

I used my table saw, but any circular saw would also work, or even a utility knife if you're patient enough. I used my table mainly because I can't cut a straight line to save my life.

 

[D'sreef]

Update: added 2 leptos (1 jack-o'-lantern and a blue one), some of my GSP is loose and flapping in the wind ( urchin). Any recommendations on reattachment? The wrasse is starting to eat frozen food, my Ruby red seems fatter and happy, and everything else is going good. Also the urchin is wearing zoas as a hat......... Question on pavona, mine seams really meaty, but I haven't noticed a lot of growth, it also has long hairy polyps, is this normal? Enjoy the photos

 

[tbrown]

The blue one looks to maybe be a Mr Freeze Lepto.

For the GSP, no advice. Sometimes super glue works but you'd have to cut it off, take it out, glue it, and put it back hoping it stayed. You can always take a razor blade and cut off the flapping part and glue it to a frag plug though. Or toss.it.