Ewww look at this filter!

AydenLincoln

Pufferfish lover!
View Badges
Joined
Mar 27, 2022
Messages
7,173
Reaction score
10,504
Location
Easton
What state or country do you live in
Pennsylvania
Rating - 100%
1   0   0
I would say it’s safe to say it was time to change my RODI filters. I’ve been running it since 2022 and this is the first time I changed my membrane and carbon block. The other ones I haven’t changed and to be fair it’s because my TDS is 0 and I do flush it although most of the time I don’t or I forget lol. It’s amazing how fast it is again. My pressure shot right back up to above 80 compared to around 20 meaning the water was being made so slowly. And I got the replacement filters close to a year ago I just never changed them until now lol.
IMG_5593.jpeg
IMG_5594.jpeg
 
Last edited:
I would say it’s safe to say it was time to change my RODI filters. I’ve been running it since 2022 and this is the first time I changed my membrane and carbon block. The other ones I haven’t changed and to be fair it’s because my TDS is 0 and I do flush it although most of the time I don’t or I forget lol. It’s amazing how fast it is again. My pressure shot right back up to above 80 compared to around 20 meaning the water was being made so slowly. And I got the filters probably a year ago I just never changed them until now lol.
IMG_5593.jpeg
IMG_5594.jpeg
1705467923558.png
Check your TDS at each fill
 
That's more nasty than protien skimmer.
I thought my rodi unit was bad which is outside.
LOL! I know it looks really bad. To be clear it didn’t smell at all and rinsed right off and down the drain. The inside of RODI unit is all clean now too.
 
I haven't even checked the cities tds.
I haven't had any issues so..
I also can't seem to find anything that says the tds rating
What RODI unit do you have? The BRS plus versions all have them or you can add them. You can also buy a handheld TDS meter.
 
1 TDS in woohoo!! And still 0 out!!!:)
IMG_5596.jpeg
if you have 1 in and 0 out, how long were you running those filters to get to that mess? I just bought a really inexpensive probe that has TDS and Temp on it (Vivosun) as a backup to the BRS on board TDS meter. would like "extra" checks.
 
And, just think, unless you are tapped off of the RO, you’re drinking that water.
 
I would say it’s safe to say it was time to change my RODI filters. I’ve been running it since 2022 and this is the first time I changed my membrane and carbon block. The other ones I haven’t changed and to be fair it’s because my TDS is 0 and I do flush it although most of the time I don’t or I forget lol. It’s amazing how fast it is again. My pressure shot right back up to above 80 compared to around 20 meaning the water was being made so slowly. And I got the replacement filters close to a year ago I just never changed them until now lol.
IMG_5593.jpeg
IMG_5594.jpeg

Dang girl. I thought I tried to get my moneys worth out of my filters but you take it to the next level :rolling-on-the-floor-laughing:
 
And, just think, unless you are tapped off of the RO, you’re drinking that water.
I have the same system she has. Mine's only been in use for 4 months and I was getting a tds of 7 AFTER RO/DI.
I just changed all my filters, backwashed the membrane and added 2 DI stages. We have very high mineral content here.

I drink bottled water.
 

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 0 0.0%
  • New growth or a color change

    Votes: 1 20.0%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 2 40.0%
  • Something I want to document in case it changes

    Votes: 0 0.0%
  • A funny or unexpected interaction

    Votes: 0 0.0%
  • I usually put the camera/phone down and just watch

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 2 40.0%

New Posts

Back
Top
Home
Post thread…
Market
What's new