I am planning to change my plumbing from a herbie overflow without the emergency drain with soft plumbing to a bean animal drain with hard plumbing. The tank has an internal overflow with two 3/4” holes and a single 1 1/2” hole in between the two. I want the middle hole (1 1/2”) for the durso drain and the other two for the herbie drain and emergency drain (3/4”). At the end it all (beside the emergency drain) connects to the fleece roller that has a 1” pvc pipe connected to it.
The problem is how to reduce the 1 1/2” to 1” and 3/4” to 1” and connect it to a single pvc pipe to the roller.
This is what I’m going for. I was thinking of using thread x pvc and some how reducing it using a coupling without using so many different sized pvc pipes.
Suggestions?
The problem is how to reduce the 1 1/2” to 1” and 3/4” to 1” and connect it to a single pvc pipe to the roller.
This is what I’m going for. I was thinking of using thread x pvc and some how reducing it using a coupling without using so many different sized pvc pipes.
Suggestions?