Hey guys,
My setup is this:
Aquarium Scalare: 80x50x50cm - 200L
Sump: 60x40x40cm (3 Divisons) - 96L
Water Replacement Deposit: 10x40x40cm - 16L
Sump Pump: AquaBee UP 2000 (Output 2000l / h)
Circulation Pump: REEF-Tide 6000 Compact DC (Flow Rate 1500 to 6000)
Protein Skimmer: Bubble Magus Curve 5
Thermostat: Eheim 250w
Refractometer: V2 TMC
Lighting: Fluval Marine Spectrum Bluetooth 32W (25 000K)
Sand: 0.1-0.2mm (Fine white sand) 30Kg
Dead Rock: 20Kg (+/-)
*Dead rocks are being treated with bleach right now
*In the next 2 months, add 20Kg (+/-) Live Rock
Synthetic Salt: Still going deeper into the topic
RO: Still going deeper into the topic about stages
My biggest doubts that, unlike the previous experience with Red Sea Max (which I always used sea water for TPA´s) are relative the mandatory use of osmosis water (or if there are products that eliminate this process) when the first water is introduced in the aquarium it must be already osmosis or just tap water?
Another question is regarding media to be used in Sump? Live rock or some kind of chemical or mechanical media? (in the past you used only Purigen and Perlon).
Another question regarding lighting will be enough for LPS corals? (Ex. Cloves, Yellow Polips, Kenia Tree, Green Start Polyp, Coral Mush, Carpet Brown,
Xênia Pompom, Zoanthus, Mushroom, Leather Umbrella)
* Only with time and successfully advancing the aquarium would you risk following the 1W/L rule and advancing on SPS corals.
Biological accelerator: Yes or No? (Seachem Stability) or wait for the live rocks?
The final goal is to have little bit of everything (fish, invertebrates, SPS and LPS corals)
Like in the aquariums of some members of the group that I identified and liked, i will follow something like these lanscape ideas:
Is something missing from me?
As i am still in the construction of setup, all opinions are valid
Thanks,
My setup is this:
Aquarium Scalare: 80x50x50cm - 200L
Sump: 60x40x40cm (3 Divisons) - 96L
Water Replacement Deposit: 10x40x40cm - 16L
Sump Pump: AquaBee UP 2000 (Output 2000l / h)
Circulation Pump: REEF-Tide 6000 Compact DC (Flow Rate 1500 to 6000)
Protein Skimmer: Bubble Magus Curve 5
Thermostat: Eheim 250w
Refractometer: V2 TMC
Lighting: Fluval Marine Spectrum Bluetooth 32W (25 000K)
Sand: 0.1-0.2mm (Fine white sand) 30Kg
Dead Rock: 20Kg (+/-)
*Dead rocks are being treated with bleach right now
*In the next 2 months, add 20Kg (+/-) Live Rock
Synthetic Salt: Still going deeper into the topic
RO: Still going deeper into the topic about stages
My biggest doubts that, unlike the previous experience with Red Sea Max (which I always used sea water for TPA´s) are relative the mandatory use of osmosis water (or if there are products that eliminate this process) when the first water is introduced in the aquarium it must be already osmosis or just tap water?
Another question is regarding media to be used in Sump? Live rock or some kind of chemical or mechanical media? (in the past you used only Purigen and Perlon).
Another question regarding lighting will be enough for LPS corals? (Ex. Cloves, Yellow Polips, Kenia Tree, Green Start Polyp, Coral Mush, Carpet Brown,
Xênia Pompom, Zoanthus, Mushroom, Leather Umbrella)
* Only with time and successfully advancing the aquarium would you risk following the 1W/L rule and advancing on SPS corals.
Biological accelerator: Yes or No? (Seachem Stability) or wait for the live rocks?
The final goal is to have little bit of everything (fish, invertebrates, SPS and LPS corals)
Like in the aquariums of some members of the group that I identified and liked, i will follow something like these lanscape ideas:
Is something missing from me?
As i am still in the construction of setup, all opinions are valid
Thanks,