- Joined
- Feb 9, 2016
- Messages
- 13
- Reaction score
- 5
Parts list.
A 12vdc battery backup. Icecap V1 is what I got to work as programmed. I suspect the v2 (24V) would work but would not switch into a low voltage program so wont last as long.
An aviation GX12 4 pin cable or terminals. I bought the terminals on amazon. They came as a set of 5 for $12. My only gripe is the female side is a box mount without a cable shield. I went the terminal route mainly for delivery timing but given a few more days to ship I'd recommend getting a cable, make sure it is Aviation GX12mm (they come in 16mm also).
A battery backup lead, wire tape and or protection of our choice and some soldering skills especially if you go the terminal route due to the small connections.
Of note I tried an IP65 cable set as they appeared to be the same dimensions but the pin spacing and barrel size were off just enough were it would not work.
A 12vdc battery backup. Icecap V1 is what I got to work as programmed. I suspect the v2 (24V) would work but would not switch into a low voltage program so wont last as long.
An aviation GX12 4 pin cable or terminals. I bought the terminals on amazon. They came as a set of 5 for $12. My only gripe is the female side is a box mount without a cable shield. I went the terminal route mainly for delivery timing but given a few more days to ship I'd recommend getting a cable, make sure it is Aviation GX12mm (they come in 16mm also).
A battery backup lead, wire tape and or protection of our choice and some soldering skills especially if you go the terminal route due to the small connections.
Of note I tried an IP65 cable set as they appeared to be the same dimensions but the pin spacing and barrel size were off just enough were it would not work.
Last edited: