Next project on the list was to get a QT put together. I had two 50 gallon breeders that each had one cracked panel, so I decided to make one out of the two. Not many pictures of this. My middle son was helping and between working/watching him help me cut apart glass tanks and just getting sucked into the project I didn’t snap many pics.
Here are a couple I did take.
This tank had a cracked bottom panel. Here is the tank with that panel removed.
Harvested the bottom panel from a tank with a cracked back panel. Cleaned all the old silicone up, and put it all back together.
Will let everything cure a few days and then will water test it. Need to cleanup some of the silicone seams as well.
Here are a couple I did take.
This tank had a cracked bottom panel. Here is the tank with that panel removed.
Harvested the bottom panel from a tank with a cracked back panel. Cleaned all the old silicone up, and put it all back together.
Will let everything cure a few days and then will water test it. Need to cleanup some of the silicone seams as well.