Just made the switch to led.

  • Thread starter Thread starter slate744
  • Start date Start date
  • Tagged users Tagged users None

slate744

Active Member
View Badges
Joined
Sep 10, 2013
Messages
352
Reaction score
11
Location
Howard city, Michigan
Rating - 0%
0   0   0
So I just switched over from t5 to led. I was running a 6×54 watt t5 and now have 2 evergrow 165 watt led fixture. How long should I wait before I start to ramp up the leds? I am currently running them at about 20%
 
I recently just got 120ws chinese ones off ebay and I have sps and lps I turned a little bit every day and when I would hit 25 50 75 id let sit for 2 days see how everything was then kept going up and everything is happy and growing
 
So I just switched over from t5 to led. I was running a 6×54 watt t5 and now have 2 evergrow 165 watt led fixture. How long should I wait before I start to ramp up the leds? I am currently running them at about 20%

A good starting point with this type of LED fixture is to run White channel at 20-25% and Blue channel at 40-45% then bump up a little every 4 or 5 days until you get to around 35-45% White and 55-65% Blue. You can do slight adjustments towards blue or white as to your preference but close to this overall intensity is all that is needed and any more typically can/will do more harm then good.

Cheers, Todd

P.S. Height above tank and optics should also be taken into consideration.
 
Last edited:
Thanks guys for the input. I thought it looked a little dark when I had both channels as low as I did. I was just nervous about turning them up more. I'll increase the percentage in the morning and see how everything does.
 

A good starting point with this type of LED fixture is to run White channel at 20-25% and Blue channel at 40-45% then bump up a little every 4 or 5 days until you get to around 35-45% White and 55-65% Blue. You can do slight adjustments towards blue or white as to your preference but close to this overall intensity is all that is needed and any more typically can/will do more harm then good.

Cheers, Todd

P.S. Height above tank and optics should also be taken into consideration.


I'm only about 8" off the water and have 90° optics.
 
When I went from T5, all ATI bulbs, to LED I started with Blue at 100% peak and slowly ramped up the white over 2 weeks from 50% at peak to 100% now. If anything the corals needed more light, not less, but I feed heavily so that might make the difference.
 
Im currently around 8-10" off the water and i run on a timer for 9hrs made my own daylight fade timer with the white and blue and corals and everything are loving it
ImageUploadedByREEF2REEF1401711406.944941.jpg
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 7 35.0%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 25.0%
  • Buying the wrong equipment the first time

    Votes: 4 20.0%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 6 30.0%
  • Chasing numbers or making too many changes

    Votes: 3 15.0%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 3 15.0%
  • Poor aquascaping or tank-design decisions

    Votes: 1 5.0%
  • Failing to research an animal’s needs

    Votes: 1 5.0%
  • Trusting bad advice

    Votes: 3 15.0%
  • Doing something on the tank when you should've gone to bed

    Votes: 4 20.0%
  • Something else—tell us below

    Votes: 4 20.0%
  • I’m still waiting for my first expensive lesson!

    Votes: 2 10.0%
Back
Top
Home
Post thread…
Market
What's new