Kalk Stirrer on GHL?

[ReefCheef]

Hey everybody. Is anyone running a kalk reactor on their GHL profilux? I'm struggling to find a way to have the reactor turn on once an hour for 15 mins. Is there a way to code this logic into one of the powerbar ports?

 

[ingchr1]

A cyclic timer or 3 normal timers combined in programmable logic?

#ghlusers @Lasse @Ditto

 

[Ditto]

I would think Cyclic would be the easiest to do :) . Configure the timer, and then assign that timer to the switch port:

https://www.aquariumcomputer.com/knowledge-base/how-to-setup-a-cyclic-timer-function/
switch on after (45 minutes)
mix wait time 2700
max wait time 2700

switch off after (15 Minutes)
min wait time 900
max wait time 900

 

[Lasse]

I have notice one funny thing. If you first assign the actual outlet to the timer you are going to do - save - and after that configure the timer as @Ditto suggest - and when you save this - the cycle starts with the on period active. If you instead first configure the timer - save - and after that assign to the wanted socket - it looks like it have to go a whole cycle with start with the paus active. Have you done this way - and afterwards change the timer - it start wit the on cycle.

Sincerely Lasse