Keeping Salinity Stable. ATO?

  • Thread starter Thread starter Bryan47
  • Start date Start date
  • Tagged users Tagged users None
If 35 ppt and sg = 1.0264 do not line up, it is a brine refractometer and not a true seawater refractometer.

If you calibrate it with a 35 ppt standard, you can set it for 35 ppt or sg = 1.0264, then stick with reading whichever unit of measure you set correctly.

Randy I have a question for you. Another customer at a pet store told me using RODI for saltwater tanks wasn't good and it was too filtered. I disagreed with him but I said I would ask the genius that is Randy Holmes-Farley. So is RODI worse than just plain filtered water? I assume he meant like using a Brita type filter.
 
If 35 ppt and sg = 1.0264 do not line up, it is a brine refractometer and not a true seawater refractometer.

If you calibrate it with a 35 ppt standard, you can set it for 35 ppt or sg = 1.0264, then stick with reading whichever unit of measure you set correctly.

I have heard about this.

Does it say on the packaging when you buy one if it is seawater or brine?

Or do you have to test it to know?
 
Randy I have a question for you. Another customer at a pet store told me using RODI for saltwater tanks wasn't good and it was too filtered. I disagreed with him but I said I would ask the genius that is Randy Holmes-Farley. So is RODI worse than just plain filtered water? I assume he meant like using a Brita type filter.

RO/DI is perfect for a marine system. There's nothing in tap water that you want that isn't already in a salt mix.

RO/DI is too clean for a fresh water tank (except it is fine for top off or small water changes). Most creatures cannot live in pure deionized water. Folks generally add some salts if they are going to use it for a fresh water setup. :)
 
I have heard about this.

Does it say on the packaging when you buy one if it is seawater or brine?

Or do you have to test it to know?

Almost never will it say brine. I think true seawater refractometers are typically going to make that claim on the package, however. :)
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 11 24.4%
  • Retest nutrients and other parameters

    Votes: 10 22.2%
  • Adjust flow or lighting

    Votes: 1 2.2%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 6 13.3%
  • Improve filtration or nutrient export

    Votes: 2 4.4%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 12 26.7%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 6.7%
Back
Top
Home
Post thread…
Market
What's new