Kessil Controller

[Denver45]

I’ve got a Kessil A360WE set up on my 45 gallon Jbj. I’m looking for a controller for the light and saw some folks having issues with the spectral x. Is there a different controller that works better or is the spectral x what I’m going to find? Appreciate the help!

 

[Eagle_Steve]

I’ve got a Kessil A360WE set up on my 45 gallon Jbj. I’m looking for a controller for the light and saw some folks having issues with the spectral x. Is there a different controller that works better or is the spectral x what I’m going to find? Appreciate the help!

I use an X on 4x 360s (older and mix of them). I have them connected to the 0-10v port and have no issues. I do have to power the controller via a USB, as opposed to powering it from the k-link from the light.

With that said, you will need

1x controller
1x USB power brick (5v/1A) (I used an old phone brick)
1x USB to micro USB cable to run from the brick to the controller (I used an old phone cable lol)
1x (more if multiple lights are used) 0-10v cable aka 1/8" (3.5mm) stereo male phono plug to 1/8" (3.5mm) stereo male phono plug. I went with a 5 pack off Amazon for cheap and they work just fine.

Connect the power brick/usb cable to center port on controller, then plug the 3.5mm cable into the 0-10v port, then into the light input, set the controller up and good to go. Just setup the light in the 0-10v menu in the dashboard.

 

[Denver45]

I use an X on 4x 360s (older and mix of them). I have them connected to the 0-10v port and have no issues. I do have to power the controller via a USB, as opposed to powering it from the k-link from the light.

With that said, you will need

1x controller
1x USB power brick (5v/1A) (I used an old phone brick)
1x USB to micro USB cable to run from the brick to the controller (I used an old phone cable lol)
1x (more if multiple lights are used) 0-10v cable aka 1/8" (3.5mm) stereo male phono plug to 1/8" (3.5mm) stereo male phono plug. I went with a 5 pack off Amazon for cheap and they work just fine.

Connect the power brick/usb cable to center port on controller, then plug the 3.5mm cable into the 0-10v port, then into the light input, set the controller up and good to go. Just setup the light in the 0-10v menu in the dashboard.

Thanks so much, really appreciate all the help!

 

[Blue Ring Octopus]

I might be wrong put the Spectral X goes to a 360 X not a 360 WE

Look in this package this is the controller
Kessil - A160 Tuna Blue LED Light with New Spectral Controller X & Gooseneck Package$373.00marineandreef.comFree by 2/13

Kessil A-Series Spectral Controller - The Fish Roomhttps://www.thefishroom.net › products › kessil-a-series...

 

[Eagle_Steve]

I might be wrong put the Spectral X goes to a 360 X not a 360 WE

Look in this package this is the controller
Kessil - A160 Tuna Blue LED Light with New Spectral Controller X & Gooseneck Package$373.00marineandreef.comFree by 2/13

Kessil A-Series Spectral Controller - The Fish Roomhttps://www.thefishroom.net › products › kessil-a-series...

If you can still find an A series controller it works also. The X controller is backwards compatible, so works with X or WE variants of the lights.

 

[rgulrich]

I'm using the controller for an array of six A360WE and three A500X using both channels.
Cheers,
Ray :cool: