Leather Coral Issue

  • Thread starter Thread starter E.J.
  • Start date Start date
  • Tagged users Tagged users None

E.J.

Community Member
View Badges
Joined
Apr 11, 2020
Messages
38
Reaction score
32
Location
Kinnelon, New Jersey
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
My sinularia which I've had for a few years and is almost a foot across fully expanded seems to have some kind of recession on the stalk. There were some brown spots that easily came off with a light toothbrush scrubbing. When I look at old photos, it's there but much lower down on the stalk. It isn't drooping or closed up (but it is annoyed with the light scrubbing). Alk 8.0. Calc 400, nitrate ~10ppm, Po4 ~.1 (fighting some dinos so it's purposefully elevated) Any ideas? Terrible photo - my reef looks much brighter and warmer.
coral.jpg
 
Is flow being impeded, have you cleaned wave makers?
Lighting lower?
 
Is flow being impeded, have you cleaned wave makers?
Lighting lower?
It's in a turbulent zone of the aquarium and well lit with a ATI Sunpower 6x55w fixture which puts out a lot of par.
 
I have a sinularia thats just about as big as yours, it has grown itself off the rock it was attached too, kind of fallen off because of the weight of it I figure. Now I need to re-pot it onto another rock. Anyway, is yours ok, is it leaning over, maybe something similar? Just a guess. good luck
 
I just went through something like this with my leather. It wasn't looking the greatest and had some brown patches on it. I did a 10 minute iodine dip. It took about a week but the brown is gone and its perked back up. No polyp extention yet but everything else looks good.
 
I have a sinularia thats just about as big as yours, it has grown itself off the rock it was attached too, kind of fallen off because of the weight of it I figure. Now I need to re-pot it onto another rock. Anyway, is yours ok, is it leaning over, maybe something similar? Just a guess. good luck
No leaning over. It's appears to be firmly anchored.
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 7 20.6%
  • Retest nutrients and other parameters

    Votes: 8 23.5%
  • Adjust flow or lighting

    Votes: 0 0.0%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 4 11.8%
  • Improve filtration or nutrient export

    Votes: 2 5.9%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 10 29.4%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 8.8%
Back
Top
Home
Post thread…
Market
What's new