LED'S supplements for MH lightning fixture

[Smite]

Im sure a pair of orpheks will be fine for any tank narrower than 36" front to back. Personally, I'd have them placed between the MH and T5 for blending when all lights are on. Otherwise you might see a gap in the middle when looking from the side and blue under overhangs.

 

[oreo54]

Some folks wrote here that Orpek led bars have narrowed spread.
I'm guessing that this problem could be solved with high mounting of that bars.
45 cm above water surface is fine ?

Estimate area with this:
https://store.marinebeam.com/beam-angle-calculator-1/

 

[Yanir34]

Good evening everyone!
I have decided to go with 2 reef brite Lumilite Pro actinic .
I want to connect them with Bluetooth controller, but don't understand which one of them fit for this mission .
Anyone here knows which model will do the job ?
I don't know how to upload the link from BRS website, here is screen shot

 

[oreo54]

Good evening everyone!
I have decided to go with 2 reef brite Lumilite Pro actinic .
I want to connect them with Bluetooth controller, but don't understand which one of them fit for this mission .
Anyone here knows which model will do the job ?
I don't know how to upload the link from BRS website, here is screen shot

There are a lot cheaper ways to dim them from a tc-421 on up..
Mostly phone app or wifi.
BT is kind of dead..

Any constant voltage array is cheaply controlled..See all the strip light units..

 

[minus9]

Good evening everyone!
I have decided to go with 2 reef brite Lumilite Pro actinic .
I want to connect them with Bluetooth controller, but don't understand which one of them fit for this mission .
Anyone here knows which model will do the job ?
I don't know how to upload the link from BRS website, here is screen shot

Email Tulio at Reef Brite, he’ll guide you on how to do it.

 

[oreo54]

Good evening everyone!
I have decided to go with 2 reef brite Lumilite Pro actinic .
I want to connect them with Bluetooth controller, but don't understand which one of them fit for this mission .
Anyone here knows which model will do the job ?
I don't know how to upload the link from BRS website, here is screen shot

One is for 2 power supplies 1 strip on each, the other for 1 ps 2 strips.
Afaict...



If you can use the 1 ps / 2 strips depends on the size of the orig ps and if it has enough wattage for 2 bars or upgrade the ps.

All depends on you. Which bars are you considering?
How many and what do you want them to do?

 

[Yanir34]

One is for 2 power supplies 1 strip on each, the other for 1 ps 2 strips.
Afaict...



If you can use the 1 ps / 2 strips depends on the size of the orig ps and if it has enough wattage for 2 bars or upgrade the ps.

All depends on you. Which bars are you considering?
How many and what do you want them to do?

I want to order 2 bars , Lumilite pro Actinic, 48' models.
will be sunset/sunrise and some extra pop to the MH/T5

I'm really confused which model of Bluetooth controller to select

 

[Yanir34]

Email Tulio at Reef Brite, he’ll guide you on how to do it.

How can I get his email ?

 

[minus9]

Reef Brite contact

 

[piranhaman00]

The lumi lite pros are a bad decision, you will not notice they are on with the MH,

 

[Yanir34]

The lumi lite pros are a bad decision, you will not notice they are on with the MH,

What is your recommended led bars , instead reef brite ?

 

[piranhaman00]

What is your recommended led bars , instead reef brite ?

XHOs are the only option. No lenses and high output

 

[Yanir34]

XHOs are the only option. No lenses and high output

What about orphekled bar OR3 , blue plus model ?

 

[bobnicaragua]

What about orphekled bar OR3 , blue plus model ?

I have the OR3s and the XHOs. You will see them both with the halides on.

 

[Yanir34]

I have the OR3s and the XHOs. You will see them both with the halides on.

Thanks !

 

[minus9]

I have the OR3s and the XHOs. You will see them both with the halides on.

Agreed! The difference is price (xho’s are much more) and dimming. Orpheks have been threatening us with dimming capabilities for a few years, but nothing yet as far as I know, but xho’s have dimming at an extra cost, which increases their overall cost even more.

 

[oreo54]

What about orphekled bar OR3 , blue plus model ?

https://21ledusa.com/collections/reefbar-pro?page=2

Just go " cheap" for supplemental light.
Only need one sunsetter..

It is powerful enough to run both channels on a 4ft ReefBar Pro and can run up to 4 of the 4ft Reefbars (using correct splitters that we can provide)