I'm swedish and my english might not be some so good. but I hope most of this text is worth reading anyway.
When I bought new lighting (Coral Box Moon LED) for my new aquarium , I thought about a better manual on how to connect these to router if you want to be able to control multiple at the same time. Or if you just want to use one.
1. Unpack your lighting, mount it on the edge of the aquarium with a gooseneck bracket that comes with or hang it up. Both gooseneck and bracket for hanging included.
2. Connect the lighting with the supplied transformer.
3. Download the Aqua Led app in the App Store or Google Play Store.
4. NOTE!! The following steps are if you have one lamp or if you want to control each lamp separately!! Continue to step 7 to connect more lights via your router. Be sure to have the wi-fi plug on your phone or tablet. Then go to the wi-fi settings in your phone or tablet and search for the lamp. The name of the lamp is on the back of it just where the gooseneck bracket is, select it and connect.
5. Launch the Aqua Led app you previously downloaded.
6. Select the "Wireless" tab in the top left. Then select "Search for device" if you only have one lamp you want to control. After a while, your lamp will appear in a list below. Check the Box on the left side and you are connected. After this you can go back to the main page of the app and either choose the button with the finger for manual settings or the button with the clock to program up to 24 points at a time and how many percent of the six different channels will light up.
7. This step is for those who want to connect more than one lamp via a router and have the same programs on them!! You must then press the reset button on the lamp for 10 seconds (see image where it is). The green LED on the front of the lamp should flash twice and then vary between orange and green. You must do this on all lamps you want to control via your router.
8. Launch the Aqua Led app you previously downloaded.
NOTE!! Check your router!! If you have a router that transmits on two different bands (2,4ghz and 5ghz), it only works at 2.4ghz!!
9. Select the "Wireless" tab in the top left. Then select "Add wi-fi connection". Select the network connection you want to use and click "Connect" after twenty seconds press "Stop" and return to "Wireless." There you now choose "Search for device". If you now have three lamps then all of these will come up after a while. Click the checker for each lamp and you will now be ready to program the lamp as you want it.
Have fun!!
Christian
When I bought new lighting (Coral Box Moon LED) for my new aquarium , I thought about a better manual on how to connect these to router if you want to be able to control multiple at the same time. Or if you just want to use one.
1. Unpack your lighting, mount it on the edge of the aquarium with a gooseneck bracket that comes with or hang it up. Both gooseneck and bracket for hanging included.
2. Connect the lighting with the supplied transformer.
3. Download the Aqua Led app in the App Store or Google Play Store.
4. NOTE!! The following steps are if you have one lamp or if you want to control each lamp separately!! Continue to step 7 to connect more lights via your router. Be sure to have the wi-fi plug on your phone or tablet. Then go to the wi-fi settings in your phone or tablet and search for the lamp. The name of the lamp is on the back of it just where the gooseneck bracket is, select it and connect.
5. Launch the Aqua Led app you previously downloaded.
6. Select the "Wireless" tab in the top left. Then select "Search for device" if you only have one lamp you want to control. After a while, your lamp will appear in a list below. Check the Box on the left side and you are connected. After this you can go back to the main page of the app and either choose the button with the finger for manual settings or the button with the clock to program up to 24 points at a time and how many percent of the six different channels will light up.
7. This step is for those who want to connect more than one lamp via a router and have the same programs on them!! You must then press the reset button on the lamp for 10 seconds (see image where it is). The green LED on the front of the lamp should flash twice and then vary between orange and green. You must do this on all lamps you want to control via your router.
8. Launch the Aqua Led app you previously downloaded.
NOTE!! Check your router!! If you have a router that transmits on two different bands (2,4ghz and 5ghz), it only works at 2.4ghz!!
9. Select the "Wireless" tab in the top left. Then select "Add wi-fi connection". Select the network connection you want to use and click "Connect" after twenty seconds press "Stop" and return to "Wireless." There you now choose "Search for device". If you now have three lamps then all of these will come up after a while. Click the checker for each lamp and you will now be ready to program the lamp as you want it.
Have fun!!
Christian
Last edited: