Marin Lab & Triton May 2018

  • Thread starter Thread starter chefjpaul
  • Start date Start date
  • Tagged users Tagged users None

chefjpaul

2500 Club Member
View Badges
Joined
May 21, 2014
Messages
3,278
Reaction score
4,599
Location
South Florida
What state or country do you live in
Florida
Rating - 0%
0   0   0
So, I received My ICP results back from both Marin lab & Triton. Both samples were taken and sent in May, two weeks apart, with one 10% water change between.
The tank is very new, a few months. I intentionally have my NO3 & PO4 elevated slightly, as I transferred over my little Dino friends from my last tank.
The Dino's are gone as of now, have a touch of cyano on the sand, but not overly worried about it atm, as the tank is still getting groove on. corals are looking fairly good, could be a touch better with colors, fishes are happy and fat.

what I am curious the most about are the Li & CU. I am assuming the LI maybe from the dry rock and materials used to cement the rock, but the copper has me.??
Should I be overly concerned with zinc or anything else?

Ill order some detox to have on hand, for the copper etc..
(one of the tests says 2017, that was just the register date)
thanks.
 

Attachments

The lithium is not a concern. Many people (myself included) have higher levels than you, and probably from the salt mix. It is not a very toxic compound. It can't be removed by ordinary binders that I am aware of. It looks almost exactly like sodium ion, so won't bind to most things that sodium doesn't bind to. I'd ignore it.

Copper is much more toxic, but probably isn't high enough in your tank (at 6 ppb) to cause a problem. I have 10-15 ppb the first time I measured it myself (but years later when Triton did a test, found none). Still, I'd probably look to remove the source, or use a product like cuprisorb or metasorb or a boyd polyfilter.
 
The lithium is not a concern. Many people (myself included) have higher levels than you, and probably from the salt mix. It is not a very toxic compound. It can't be removed by ordinary binders that I am aware of. It looks almost exactly like sodium ion, so won't bind to most things that sodium doesn't bind to. I'd ignore it.

Copper is much more toxic, but probably isn't high enough in your tank (at 6 ppb) to cause a problem. I have 10-15 ppb the first time I measured it myself (but years later when Triton did a test, found none). Still, I'd probably look to remove the source, or use a product like cuprisorb or metasorb or a boyd polyfilter.
Sounds good.

I just thought that LI was a weird one, now if my stocks in LI start taking off, well be in business!!

Yeah, they're (triton), recommending dosing all kinds of minor things, iodine, strontium, molybdenum, vanadium, manganese....

I'll probably just change water a bit more often for awhile.

Thanks Randy.
 
Some of those minor addition might be useful (or not). I'd approach each as an experiment to see if it is useful. Of the ones you list, my money is on vanadium, manganese and molybdenum. :)
 
Some of those minor addition might be useful (or not). I'd approach each as an experiment to see if it is useful. Of the ones you list, my money is on vanadium, manganese and molybdenum. :)
Ok..... Sounds like fun actually, better than chasing dinos.

Get some research and reading up on these done, & Ill go for it.

The suggested dosages are so minimal, so it will be interesting. Since their supplement bottles are 100ml, they should last a life time anyway.
[emoji2] [emoji2]
 
The Marin Lab test shows your Cu and Li to be fine, whereas the Triton test has them elevated with the copper through the roof.
How would the copper get so high? I am assuming the Triton was done after the Marin Lab test.
Could this be test error on one of the two companies?
 
The Marin Lab test shows your Cu and Li to be fine, whereas the Triton test has them elevated with the copper through the roof.
How would the copper get so high? I am assuming the Triton was done after the Marin Lab test.
Could this be test error on one of the two companies?
That was one of my concerns and why posted both, Also why I tested within the same month, just to see variations.

The AL was a concern with marinlab where Triton was fine.

Only thing I was dosing was seachem nitrogen and seachem phosphorus.

Rodi is 0. Very adamant about keeping that impeccable. I do have an rodi sample being tested just to reassure.

Triton was done two weeks after.
One water change in between.
AF salt. No other supplements, dosing etc.

All equipment is new.

I Don't know enough to know.[emoji2] ....but Ill find out.

Ill keep updating the things I adjust.

I ordered some metasorb & (cuprisorb to have).
 
Since their supplement bottles are 100ml, they should last a life time anyway.[emoji2] [emoji2]

Their Boron one comes in the milk jug and leaked on me, the iodine is a nice 100ml plastic or glass bottle that will last a long time.
 
Their Boron one comes in the milk jug and leaked on me, the iodine is a nice 100ml plastic or glass bottle that will last a long time.
Yeah, I'm putting an order together now.
Mainly for the trace base supplements.

I guess It's developing into a cross - AF / Triton aquarium.
 
Yeah, I'm putting an order together now.

FWIW They don't come with 1ml droppers. I bought a few from whatever I ordered them from, Unique Corals I think.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 14.8%
  • Lighting, pumps, or other major equipment

    Votes: 4 14.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 7.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 7.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 7 25.9%
  • Fish or other livestock

    Votes: 1 3.7%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.7%
  • I’m browsing, but don’t have a specific target

    Votes: 4 14.8%
  • I’m not shopping for reef deals this year

    Votes: 1 3.7%
  • Other (Post in the comments)

    Votes: 1 3.7%
Back
Top
Home
Post thread…
Market
What's new