Jgoal55
Active Member
I use an Eero Router which as I understand it supports both 2.4 and 5ghz.
Maxspect icv6
- Thread starter som857ee
- Start date
- Tagged users None
Ok, may we have your email address?
Are you still accessible on here as I started a ticket through the Maxspect website and have heard nothing. I have this ICV6 to allow control of my XF350 powerheads through their controller. I have tried each and every suggestion on here and still can't get my ICV6 to connect to Wi-Fi nor can I access it direct. Occasionally I can get it show up as a network on my phone in an effort to connect directly but then it will never allow me to connect to that network. It worked at one time in the past and i setup pumps to my preference. Updated the SYNA-G software recently as it suggested and hasn't worked since! Powered off and held power button forever after plugging back into power! Have turned off all 5g band Wi-Fi and confirmed strong 2.4 signal at location! Turned on location on devices used to try to connect to include 2 each of both apple and android devices! Someone suggested online to download latest firmware and install via an SD card. However, link on Maxspect for the latest firmware does not work either? Any help would be appreciated as I can't tell you how much I am now regretting going with Maxspect!!!
Hi, regarding this issue, may we know whether the ICV6 has entered the breathing mode as per the App advised before connecting to your router?
Gary943
New Member
I just bought 1 and face this issue that you all having be trying to sorting it out. And today is 5 Nov 2023 they are still selling such device that we don’t known it have design defects.
Hi，may we know whether you have tried resetting the ICV6?
Hi，may we know whether you have tried resetting the ICV6?
Leon821019218
Active Member
Hello @csmaxspect Still here? I have a new phone and I can't get a connection going with the IVC 6 controller and it's driving me nuts! Connecting with my router never worked so I did it with my phone and that was OK. when I try to connect now it gives a notification ''Turn on WIFI and connect to a WIFI name that starts with 'Maxspect' '' Well that's exactly what I did. Please help!
Attachments
Hi may we know whether you have turned on the GPS/location function on your phone, because the App needs the function authority to enable it to read the SSID of the WiFi.
Last edited:
Leon821019218
Active Member
Yes I turned location on.Hi may we know whether you have turned on the GPS/location function on your phone, because the App needs the function authority to enable it to read the SSID of the WiFi.
If the issue remains, please kindly reset the ICV6 and check again,
1) Cut the power,
2) Press the power button and keep the power button pressed,
3) Reconnect the power, while keeping the power button pressed until the red flash(Several times) is gone.
Leon821019218
Active Member
Cut the power and THEN push the power button? But if there is no power, what use does it have then? Are you sure you put it in the right order?? :)
hi, the order is right, power off; then press and hold the power button while reconnecting power, if you could provide an email address, we can send you the video for referrence.
RegalAngel
Community Member
- Joined
- Jan 22, 2017
- Messages
- 36
- Reaction score
- 8
Replaced an old Linksys router with a new model as the Linksys output speed had dropped considerably.
The new TP Link Archer would not find/connect regardless of the many times I tried all the options presented in this thread and many other ideas over a period of three day/8 hours.
Tried the Bluetooth route and finally did get the maxspect wifi network showing in the phone Wifi Connect and am able to connect via SYNA-G. Not as easy as being on the network but I can make it work.
The new TP Link Archer would not find/connect regardless of the many times I tried all the options presented in this thread and many other ideas over a period of three day/8 hours.
Tried the Bluetooth route and finally did get the maxspect wifi network showing in the phone Wifi Connect and am able to connect via SYNA-G. Not as easy as being on the network but I can make it work.
rbkl
Community Member
Hi,
2 years ago I purchased a Maxspect RSX300 led ramp and an ICV-6 to connect it to my home wifi. It never connected to my home wifi but worked in Access Point mode (AP mode).
Last night I gave it another try, trying to pass my home wifi credentials when connected to it through AP mode. IT WORKED. I put together a script that allows you to pass your home network ssid/password once connected in AP mode. It then restart the ICV-6 and VOILA, hopefully it now connects to your home network. Here is the GitHub repository if someone else has challenge with this device. If you don't have maxspect and ICV-6 devices, just don't ! They are very flaky I will never purchase anything from Maxspect anymore. Support is also non existant.
GitHub repository: https://github.com/rbickel/ICV6-STA-Script
Hope that helps people with the same issue.
2 years ago I purchased a Maxspect RSX300 led ramp and an ICV-6 to connect it to my home wifi. It never connected to my home wifi but worked in Access Point mode (AP mode).
Last night I gave it another try, trying to pass my home wifi credentials when connected to it through AP mode. IT WORKED. I put together a script that allows you to pass your home network ssid/password once connected in AP mode. It then restart the ICV-6 and VOILA, hopefully it now connects to your home network. Here is the GitHub repository if someone else has challenge with this device. If you don't have maxspect and ICV-6 devices, just don't ! They are very flaky I will never purchase anything from Maxspect anymore. Support is also non existant.
GitHub repository: https://github.com/rbickel/ICV6-STA-Script
Hope that helps people with the same issue.
Similar threads
TOP 10 Trending Threads
-
- Sticky
