Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yeah agreed risk I took. Actually bought two of them used but the other isn’t here yet. Hopefully it doesn’t sound like this.Should definitely not sound like that. Unfortunate this is the risk taken when buying used.
Sorry for that man. I have 2 mp40s and they do NOT sound like this. Even at 100 percent. Just a gentle hum at that level and silent below say 80%Following. My mp40 is doing this also. It's a year old. It just started couple days ago. I've adjust few times but no luck.
Optical illusion I believe. I have messed with the alignment a ton.Does it make that that noise with the wet side removed? I also took a screen shot of your video. It looks like the wet side is grossly misaligned with the dry side or is that an optical illusion?
I have the large spacer. I ordered the medium once which should be to the correct one to see if makes a difference tonight. I ran my mp40 without a spacer to see if I got similar results and the 40 is pretty dang quietDo you have the outer shell set for the right thickness glass and so you have the rubber spacer pad in place?
Good question. If it still is loud with the wet side off then it could be the bearings. They can get damaged when the dry side is dropped.Does it make that that noise with the wet side removed? I also took a screen shot of your video. It looks like the wet side is grossly misaligned with the dry side or is that an optical illusion?
Great idea actually.Good question. If it still is loud with the wet side off then it could be the bearings. They can get damaged when the dry side is dropped.
I have the large spacer. I ordered the medium once which should be to the correct one to see if makes a difference tonight. I ran my mp40 without a spacer to see if I got similar results and the 40 is pretty dang quiet
Can you clean that or remove it?So the mp60 has fan blades built into the dryside, there are little slots on the outer shell that you can actually see them rotate.
This also means that debris can get inside and lodge itself in that cavity.
Just like putting baseball cards on your bicycle, the sound that you hear is more than likely that.
I have tried the large spacer and no spacer. Sound is the same regardless. I did overnight ship a medium spacer which should fit my 3/4 inch glass best. Should be here Tuesday but I am very doubtful that remove this sound. It’s so loud my kids left movie night early.What about the outer shell. You slide it off and rotate to adjust for glass thickness. It’s not always accurate in used older units and you might have to go one size up or down