What I’ve done on my birthday
Got a few more things to finish up before this thing is in place
Got a few more things to finish up before this thing is in place
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If it was holding my DT I would agree. It’s how I built the stand for the DT. But this will hold a small frag tank.i'd add one more at each corner, but that's just me.
I quick calculate compression and sheer North of 2k lb with the fasteners and dual uprights. Using 30 gallons with a 4x factor, I honestly think it will be a okay. My only concern was racking, which is why the rear spreader is there.i'd add one more at each corner, but that's just me.
If it was holding my DT I would agree. It’s how I built the stand for the DT. But this will hold a small frag tank.
i get it.I quick calculate compression and sheer North of 2k lb with the fasteners and dual uprights. Using 30 gallons with a 4x factor, I honestly think it will be a okay. My only concern was racking, which is why the rear spreader is there.
Feels ya here.but then again, i'm afraid to put electrical under my tanks.
phobias.
all mine is wall mounted or tree mounted above and away.Feels ya here.
With the 180 in one room and the sump stand in the next room behind it, I've decided my electrical controls will all be under the dt, and all equipment on the other side of the wall under the frag tank. I haven't had a reason Yet to be fearful of it but it's only a matter of time.
I need an electrician friend. That's one of the few DIY things I just don't feel comfortable doing. I also live in a house that was built in 71 with aluminum wiring, so there's that!all mine is wall mounted or tree mounted above and away.
i had my electrician move all the wall outlets that were below.
i was an aviation major in college.I need an electrician friend. That's one of the few DIY things I just don't feel comfortable doing. I also live in a house that was built in 71 with aluminum wiring, so there's that!
i figured you was just one more giving me the silent treatment.There was a whole conversation I missed lol
@sp1187 all my electric is located to right of tank
Should be safe
2 pc-100a hooked up half plugs in one half in the other
I may still add pieces to the front corners when I figure out what I’m gonna cover the front with
Well that stand didn’t build itself nor did it walk itself inside and load itself up. That and I keep getting bumped from my own thread! Shannagins!i figured you was just one more giving me the silent treatment.
Kenya?got one of these?
japanese koji wada pink nepthiaKenya?
Ooh I was looking at those. No I don’t have onejapanese koji wada pink nepthia