New Gyre Models

[Jeremy@CoralVue]

I have two 150's with two ice cap modules right now , I would like to add a pair of the 200 series pumps all to be controlled by a third party computer (Prifilux P4) so I'd like to know if the 200 series can work since I have not seen a new Icecap module.

Yes the IceCap modules will work with both 100 and 200 series Gyre pump.

 

[Dumaurier7]

Hello, any update on the icecap module for the 200 series?

 

[Jeremy@CoralVue]

Hello, any update on the icecap module for the 200 series?

The IceCap module does work with both the 100 and 200 series.

 

[Dumaurier7]

Are you sure ? Carlos said not with the 250.

 

[Jeremy@CoralVue]

I am 100% positive. I have one running here in the lab on a GIM. Our website also reflects what models the GIM will work with.
http://www.coralvue.com/icecap-gyre-interface-module-1560

 

[Dumaurier7]

Thanks much!

 

[Jeremy@CoralVue]

No problem. I am glad I was able to help.

 

[nbagnardi]

Sorry you will not be capable of using you XF130 pump on the XF250 controller. However you can use your XF130 pump on a XF230.

gotcha, thank you for getting back to me. looks like I'm ordering another 250... 2-250's should be a heck of a substitute for a pair of WAV's right?

 

[Dumaurier7]

I'll be doing a pair of 150's and a pair of 250's o my 320.[emoji41]

 

[Jeremy@CoralVue]

I'll be doing a pair of 150's and a pair of 250's o my 320.[emoji41]

Awesome! So your pair of 150s will become 250s when you pair them up with the XF250 advanced controller. That is going to be some killer flow.

 

[ahiggins]

What would you reccoment for settings for a single xf 230 for a 40 gallon breeder frag tank?
Mines in the mail! Cant wait to get it :D

 

[Jeremy@CoralVue]

I really like the LTC and the random mode. But play with all the settings to find which one you and your tank favor most.

 

[Dumaurier7]

Awesome! So your pair of 150s will become 250s when you pair them up with the XF250 advanced controller. That is going to be some killer flow.

Hi , I won't be using the controller Ill be running each on their one ICECAP module and a third party controller (GHL).

 

[ahiggins]

I really like the LTC and the random mode. But play with all the settings to find which one you and your tank favor most.

Thanks :)

 

[nbagnardi]

I really like the LTC and the random mode. But play with all the settings to find which one you and your tank favor most.

I can't use the ltc cause I only have one 250 right?

 

[dukduk]

is there still support of the XF-150?

 

[mpjmeyer]

can you use the advanced controller and the module to control with apex? I don't want to write code nor do I know how and it would be nice if easier if I could use both for easy configuration through apex

 

[Jeremy@CoralVue]

I can't use the ltc cause I only have one 250 right?

No you can use the LTC you just do not take advantage of the joint flow as seen in the diagram.

 

[Jeremy@CoralVue]

is there still support of the XF-150?

Yes there is still support of older model Gyre pumps.

 

[Jeremy@CoralVue]

can you use the advanced controller and the module to control with apex? I don't want to write code nor do I know how and it would be nice if easier if I could use both for easy configuration through apex

Right now the only option if you want the gyre to be controlled by the apex is the IceCap control module. But the module will require you to write code. The Advanced controller makes it easy to control the flow of the pump, configure complex flow patters even with two pumps without the need of a single line of code.