New Tank Selection

[Formulator]

Maybe I used the wrong keywords, but I was stunned at the lack of threads on here related to tank selection… You all have plenty to say about all the accessories - but what about the tank?

I’m in the market for a new frag tank and looking to maximize the footprint in a 24x40” area. I will primarily be propagating torches and euphyllia so needs some headspace. It will be visible in the finished area of my basement so I want it to look nice and not be only utilitarian. It will be sitting on the bar countertop that I prefer not to drill, so needs a side drain/ext design. I will plumb through the wall to the left of the tank - the other side of that wall being my sump/utility room.

Here is a photo of where I will put the tank. Its a remodel in progress - cabinets will be painted white and I need to trim in the counter edge because I can’t cut straight apparently…

 

[UncommonSense]

Here’s a recent thread that discusses different aquarium manufacturers, to get you started!

Can’t decide which tank to pick

Innovative marine ext 170 lagoon Red Sea reefer s peninsula 700 g2+ Water box peninsula 6025

www.reef2reef.com

On another technical note; It looks like you have space for up to ~1,400lbs of water/tank in that space… this should be considered in the tank sizing; what can the counter actually handle weight-wise!

 

[Formulator]

Here’s a recent thread that discusses different aquarium manufacturers, to get you started!

Can’t decide which tank to pick

Innovative marine ext 170 lagoon Red Sea reefer s peninsula 700 g2+ Water box peninsula 6025

www.reef2reef.com

On another technical note; It looks like you have space for up to ~1,400lbs of water/tank in that space… this should be considered in the tank sizing; what can the counter actually handle weight-wise!

Thanks! Great point regarding weight. It will certainly not hold as-is, but I do intend to build in additional bracing under the tank.

 

[UncommonSense]

Thanks! Great point regarding weight. It will certainly not hold as-is, but I do intend to build in additional bracing under the tank.

There are many good stand design threads too; @RocketEngineer has contributed on many of them, and may be able to chime in here on the finer points of your specific application! (Stone slab countertop, unknown cabinetry framing, etc…)

Good luck on your research! — There are plenty of good options out there, it’s all a matter of what suits your needs!

 

[Formulator]

There are many good stand design threads too; @RocketEngineer has contributed on many of them, and may be able to chime in here on the finer points of your specific application! (Stone slab countertop, unknown cabinetry framing, etc…)

Good luck on your research! — There are plenty of good options out there, it’s all a matter of what suits your needs!

Thanks! I will probably keep the stand simple. I’ve done a few…