*update view*??
@Member No 1
@Member No 1
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Flipped it. Pressed update view and no checkbox*update view*??
@Member No 1
Yes, I couldn't remember and I'm at work.*update view*??
@Member No 1
Well as crappy as that is, at least you were able to diagnose the issue!@Vinny@GHLUSA @Member No 1 @Ditto
So what I just tried is I took the thernet cable that is plugged into the ghl adin db9 / Ethernet conversion and I pressed it in and held it tight and I was able to trigger feed pause. So I have to firmly press the cable into the adapter and hold it.. lolol. That ain't gonna work
WOW! Now I know how Steve Martin felt in "The Jerk" when he got his phone book!
Mike, I don't have the adin set up so I can't try. I would think by using the switch to "start" a maintenance event, it will run it's programmed course. Maybe program the skimmer outlet to be OFF if the switch is ON. So when you turn the switch OFF, the skimmer turns ON.So skipping all the connectors and hooked the switches directly to the Ethernet cable it works.
One thing I noticed with a toggle switch if I flip the toggle switch to turn off skimmer (maintainance 4- 60 min).... And I finish cleaning the skimmer cup and stuff say in 15 min. I flip the switch back down and it stays off regardless for the entire 60 min time setting. I have to reflip the switch on cancel and turn on skimmer then down and it stays on.
Is this normal vinny?
Is there a way to flip on. And when I flip toggle down it cancels the maintenance mode
I have not worked with the kind of switch you're using. When the controller receives the command it triggers the assigned task or powerbar outlet. That task is either left to continue until the time limit expires or it is disabled through the touch keys, app or touch display.So skipping all the connectors and hooked the switches directly to the Ethernet cable it works.
One thing I noticed with a toggle switch if I flip the toggle switch to turn off skimmer (maintainance 4- 60 min).... And I finish cleaning the skimmer cup and stuff say in 15 min. I flip the switch back down and it stays off regardless for the entire 60 min time setting. I have to reflip the switch on cancel and turn on skimmer then down and it stays on.
Is this normal vinny?
Is there a way to flip on. And when I flip toggle down it cancels the maintenance mode
No I didn't ditto. I guess I can try that. There is only 2 analogs right? Actually that's all I would need. For skimmer and power for wc'sDid you try using pin 6 and 7 (analog) and see if that works?
@Ditto analog doesn't do anything I just tried it. Doesn't trigger any activation. It's ok. I'll just flip switch up to turn stuff off. And then when I'm done early. I'll just flip switch on. Back off and on and it will reverse itNo I didn't ditto. I guess I can try that. There is only 2 analogs right? Actually that's all I would need. For skimmer and power for wc's
Thanks very much Lasse. No change registering there at all. So how do I figure out where the issue is?This is the way to check if it is working. Take your push button and connect between GND and the inpu you want (in this case it is DI 4) Open your GCC and go to Digital inputs, If it work - the input will be checked
Sincerely Lasse