Placing Waterbox 230.6 on second floor

[Jack Hayden]

Hello all.

Here is the situation. I have a new house, built in 2015. It's an average house, not a mobile home or a super expensive thing either.

I want to place a Waterbox 230.6 or similar size at one of the following locations. See the attached images. The placements are across several joists, the details of which are in the images.

Yes, I do intend to eventually get a structural engineer to sign off on it, but is doing something like this normal, or should I stick to something smaller like a 90 or a couple of 45s?

 

[jsker]

Welcome to R2R and the community!!:)

 

[Retro Reefer]

Welcome to R2R :D

 

[jsker]

Yes, I do intend to eventually get a structural engineer to sign off on it, but is doing something like this normal, or should I stick to something smaller like a 90 or a couple of 45s?

is this a current picture? If so, have the builder reinforce the floor joist with the sign off of the engineer for insurance reasons would be the most economic, and structurally way to go

 

[That Crusso Kid]

Welcome to R2R, Jack.

I see no problem with doing to 230.6 as long as the joists are reinforced and supported properly.

 

[Billldg]

Welcome to R2R!!!

 

[Jack Hayden]

is this a current picture? If so, have the builder reinforce the floor joist with the sign off of the engineer for insurance reasons would be the most economic, and structurally way to go

If you mean the photo itself, no. That was when it was being built. It's all finished now. I'm not sure that tearing out the walls and adding anything is something I will be allowed to do. So let's assume I'll have to stick with what we have here.

 

[ngoodermuth]

 

[jsker]

If you mean the photo itself, no. That was when it was being built. It's all finished now. I'm not sure that tearing out the walls and adding anything is something I will be allowed to do. So let's assume I'll have to stick with what we have here.

I would suggest, showing the above picture to a engineer. The engineer would answer all your question in a matter of minutes and the Ms. will give you the green light;)

Your are looking at the Peninsula 7226?

 

[KJ]

Welcome to R2R!!!

 

[Jack Hayden]

I would suggest, showing the above picture to a engineer. The engineer would answer all your question in a matter of minutes and the Ms. will give you the green light;)

Your are looking at the Peninsula 7226?

Originally actually, yes. I was going to put it out in the middle of the floor, but then there'd be little room between it and the door area, so there would never really be anyone on that side of the tank, so against the wall is better.

 

[GoldeneyeRet]

Welcome to r2r

 

[jsker]

so against the wall is better.

Differently.

I would suggest, posting a thread over here link in one of these forums or here link to see what answers you get:)

 

[mich2599]

Welcome to R2R!:)
I’m in the same boat..but i’m a 3 triple wide.

 

[SPR1968]

Welcome to R2R!

 

[Big G]

Welcome to R2R, Jack! I have a 90 setup in a very similar looking situation to your "Final Backup Plan". It's crossing the floor joists and right next to a load bearing beam. Works great. As always, your mileage can vary. Having a structural engineer take a look at your pics would be a great idea, especially if you live in earthquake country.

 

[hdsoftail1065]

Welcome to R2R!!!

 

[Hitman]

Welcome to R2R!!!

 

[dbl]

I will add a welcome to R2R and also add another suggestion to have an engineer look at it.

 

[Salty Lemon]

Welcome to R2R. You are going to love it here.