- Joined
- Nov 29, 2017
- Messages
- 588
- Reaction score
- 397
- Location
- Miami
- What state or country do you live in
- Florida
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Okay, just one last reply b/c that’s actually not true — I use RO/DI that is remineralized and buffered using seachem products for my FW planted tank. And many FW shrimp keepers do the same using a product called salty shrimp.It's almost impossible to buffer RODI. Tap water is really difficult in a small container. A drop here and there and you start over. I'm on the RODI side with a squirt. I have not seen any ill effects. Yes, I have personally saved fish using RODI with a squirt.
Acclimation is as essential as qurantining. Its the only way to equalizing PH- salinity- temp and pre-introducing fish to new environment. Run a poll and you'll get 20 different versions of how people acclimate their new specimen.
Ive been in hobby 36 years and rarely to ever QT although advised. When I had my pet store, I acclimated all fish livestock - Both FW and SW.
I agree on salinity match prior to introduction.
My own method for acclimation is :
Floating
Transferring fish and water into bucket
Then . . . .
Add a cup of tank water to bucket every 15 mins 7-8 times (almost 2 hours)
Then check salinity in bucket and compare to tank. If no match or very close, add a cup of water every few mins until you've reached salinity and trap fish in large cup and pour off water and release into display. Doing so under LOW light before lights out.
Fantastic! Go save that little guy!Okay, just one last reply b/c that’s actually not true — I use RO/di that is remineraluzed and buffered using seachem products for my FW planted tank. And many FW shrimp keepers do the same using a product called salty shrimp.
Sorry, I missed the videos on my iPhone, but now I can see get them on my laptop -- I can never see them in Safari. Poor little guy, did he make it through the night? If so and he's still doing poorly I would post to the fish disease section so folks can help diagnose.Lemme know if this works, thx again for all the responses so far
I'm going to hope he found a spot to hide in for the night and will turn up, but I know it's possible he didn't make it.Still dark here and don’t want to shine the light in the tank to intensenly… bit didnt see a body, although this tank would disappear him real quick too.
Think he might still be kicking? He would move locations every 10-15 min and go sit somewhere else, but movement wasn’t fluid at all. Always hard to watch our lil buddies struggle, but he just didn’t ship well
This is what I have started doing. I call the company to ask about shipping salinity and prepare 1-2G of fresh saltwater. After temp acclimation, I use a syringe filled with prime to bind ammonia and get a water sample to confirm salinity and pH. If all is good, the fish is transferred to fresh water for acclimation. If the shipping salinity is more than 2 points different from my DT (e.g., 1.017 v. 1.025), the fish is acclimated to my DT salinity over 1-1.5 weeks, no more than 1 point change per day. I've had no deaths since adopting this method.I really hate the term acclimate. In my humble opinion, a fish should never be 'acclimated' in the traditional sense. Let me explain. When I get a new fish, I put the fish in a holding tank. I then read the salinity of the water IN THE FISH BAG and adjust the salinity of the holding tank to the fish bag water. When the salinity is the same, I wait an hour or so for temperature and then release the fish.
It's in a holding tank...I want it in my display? Well, I let the water evaporate or I add RODI slowly over days until it's the same levels of the display.