Mine are just the 150gal per day BRS (Dow)membranes - nothing specialAwesome! What are you running in your membrane compartments anything special or just regular membrane? I seen they have a silica buster membrane.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Mine are just the 150gal per day BRS (Dow)membranes - nothing specialAwesome! What are you running in your membrane compartments anything special or just regular membrane? I seen they have a silica buster membrane.
Yours say mixed resin.Looks like my resin canisters are refillable whats the best anion and cation resin I could buy to replace?
Do I have to run dual mixed bed after anion resin?You should be "golden"!
You should have dual bed resin as final stage. I used to run standard dual bed resin, then went to dual dual bed resin and was still cooking through dual bed resin like every other month at least 1 full cartridge. Finally I switch to Cation, Anion & dual bed resins and I go about 4 months on Anion, the Cation & dual bed resins have gone for over a year and I'm getting 0 TDS.I went with cation and anion.
I have 0 tds with no dual mix cartridge.
Do I have to have a dual mix bed after anion?
The cation and anion are what is in dual bed resin only 50/50. You should be ok, just add a dual bed in the future.Do I have to run dual mixed bed after anion resin?
Now I'm worried. Right now I'm only running cation then anion to ato.
Haven't put any water in system yet.
Alright ill order another canister and dual bed resin.You should have dual bed resin as final stage. I used to run standard dual bed resin, then went to dual dual bed resin and was still cooking through dual bed resin like every other month at least 1 full cartridge. Finally I switch to Cation, Anion & dual bed resins and I go about 4 months on Anion, the Cation & dual bed resins have gone for over a year and I'm getting 0 TDS.
You might want to add or move you tds meter.Alright ill order another canister and dual bed resin.
But am I ok to run it without it until it comes?
Right now I'm going from membrane to cation to anion to ato. I can add the dual bed but am I safe without it until it comes?
Nice im probably going to pick this up.You might want to add or move you tds meter.
Triple DI Saver with TRM-1 Triple TDS Meter
Perfect for reefers that use a lot of DI resin! Triple Deionization Saver canister kit complete with HM Digital Triple Inline TDS Meter! Just add DI resin. We suggest using BRS Pro Series Single Bed Cation Resin, Pro Series Single Bed Anion Resin, and Pro Series Mixed Bed Cation Color Changing...www.bulkreefsupply.com
Suggested Deionization Resins for efficient DI usage:
Stage 1 - Pro Series Cation Resin
Stage 2 - Pro Series Anion DI Resin
Stage 3 - Pro Mixed Bed Cation DI Resin
Triple TDS Meter Preinstalled Metering Locations
Sensor 1 - Incoming water to DI stage
Sensor 2 - After DI stage 2 and before DI stage 3*
Sensor 3 - Final output from DI stage 3
I only use 1 mixed bed at this time. 4tds in the DI resin and 0 outNice im probably going to pick this up.
I am using the pro series its cheap enough especially in bulk.
I'm curious what your readings are at each stage?
Cool I bought the little 1.5 lb refills and still have half of bag each. These little refillable cartridges I have will probably deplete pretty quickly so I may just pick that 3 stage up and be done with it. Thats a super good deal for 3 cans plus triple port tds meter. Almost can't pass it up.I only use 1 mixed bed at this time. 4tds in the DI resin and 0 out
Nice im probably going to pick this up.
I am using the pro series its cheap enough especially in bulk.
I'm curious what your readings are at each stage?
Why so emphatic about the booster pump?
If your water pressure is low, booster pump will help for faster production, better membrane rejection, and longer lasting di resinWhy so emphatic about the booster pump?