Radion Gen 3 Pro Problems

[peterpaul]

I had 4 Radions Gen 3 Pros that had all 3 buttons blinking red.

One was an easy fix where I swapped out a rf module with a working one.

Before I really start trouble shooting. Any had previous experiences with fixing radion gen 3s?

 

[_AV]

I have a playlist with a lot of radion repairs:

https://www.youtube.com/@FixReef/playlists

Also a bunch of repair articles on here:

Radion XR30 shuts off at high intensity on blue channel - repair

Some of my previous repairs: https://www.reef2reef.com/threads/radion-xr30-complete-no-light-repair.792711/ https://www.reef2reef.com/threads/radion-xr15-doesnt-power-on-due-to-corrosion-repair.809136/ https://www.reef2reef.com/threads/another-attempt-at-fixing-apex-eb832.804717/ And as always...

www.reef2reef.com

Water Damaged Radion Repair or The Mystery of The Red Sticker

FixReef is now also on YouTube! https://www.youtube.com/channel/UCMAmpCr_0gSwhmTNGzXTPtg Enjoy this repair, now in HD :) It has been awhile since my last repair article. And for a good reason, you guys have been keeping me busy with the repairs. Thank you. Let's take a short break from...

www.reef2reef.com

Radion XR30 complete no light repair

My previous electronic equipment repairs Radion XR15: https://www.reef2reef.com/threads/radion-lights-board-level-repair.774331/#post-8197536 A fellow reefer mailed me their Ecotech Radion for repair service as it's long been out of warranty. The unit turns on briefly before shutting down and...

www.reef2reef.com

 

[CoralB]

Nice !!! :cool:

 

[peterpaul]

After troubleshooting. The problem lies with the main board. I don't think there is anything I can do. Called Ecotech and they offered me an upgrade option. Will consider options.

 

[_AV]

There's always an option to send it to me for a board level repair ;)

 

[peterpaul]

I know one RF card is not working.

One unit the 3 buttons are blue and the fan is on when plugged in but cannot connect to ecosmartlive

One unit the 3 button are blinking red and green. The lights go on for just a moment then only 4 white legs and two green legs remain on. I tried to do a factory reset but still same result.

The 3rd unit is just dead.

What would u recommend?

 

[42Freeman]

Nice!

 

[_AV]

I know one RF card is not working.

One unit the 3 buttons are blue and the fan is on when plugged in but cannot connect to ecosmartlive

One unit the 3 button are blinking red and green. The lights go on for just a moment then only 4 white legs and two green legs remain on. I tried to do a factory reset but still same result.

The 3rd unit is just dead.

What would u recommend?

Just send them all over, I'll sort them all out. I don't see anything particular critical from your description.

 

[Jasonak]

What was the ecotech offer ?

 

[peterpaul]

What was the ecotech offer ?

40% off retail price on the g6

 

[OrionN]

I also swab parts of my ecotech lights and got some working units out of it.