- Joined
- May 30, 2020
- Messages
- 1,173
- Reaction score
- 881
My ph hovers around 8.0 which is fine the ps2 skimmer has an intake at the top so it would be tough to rig it up. But you really don’t need to
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ya looking at it now it looks like a big cover for the air intake.Also on ps2 there’s a little foam cover on the air intake. Every once and a while make sure you clean it. It makes a huge difference in performance. Also just ask when it comes to tuning it. Water level in the tank makes a huge difference
Why can't you plug the air intake line on the PS2 directly into air tubing instead of that hole at the top of the collection cover? I plan to run a line from the CO2 scrubber directly into the air intake of the PS2 and then have the return air plumbed into the Fluval's hole at the top of the skimmer with a barbed connector.Ya looking at it now it looks like a big cover for the air intake.
Is there any other skimmer that fits this tank that is easier to hook up an airline to?
I will figure something out tomorrow and let you know. I put my order in to pick up tomorrow.Why can't you plug the air intake line on the PS2 directly into air tubing instead of that hole at the top of the collection cover? I plan to run a line from the CO2 scrubber directly into the air intake of the PS2 and then have the return air plumbed into the Fluval's hole at the top of the skimmer with a barbed connector.
It also adds massively to salt creep, and especially on a low canopy like the one on the Evo. I've got an airstone in mine (it did raise the pH by 0.1), and the salt encrustation is interfering with the touch light system. I'll be taking out my own airstone tonight.For the record I took the air stone out now as I noticed micro bubbles after an hour of it running. Will not work to my liking in this tank...
It also adds massively to salt creep, and especially on a low canopy like the one on the Evo. I've got an airstone in mine (it did raise the pH by 0.1), and the salt encrustation is interfering with the touch light system. I'll be taking out my own airstone tonight.
I don't have the lid.. I ditched it long ago for an a.i. prime and it is amazing!It also adds massively to salt creep, and especially on a low canopy like the one on the Evo. I've got an airstone in mine (it did raise the pH by 0.1), and the salt encrustation is interfering with the touch light system. I'll be taking out my own airstone tonight.
I am currently dosing red Sea 2 part. I am using about 0.6 dkh a day. Would kalk work for this amount of alk and ph?Why not just drip Kalk?
I am using kamoer wifi auto doserI am currently dosing red Sea 2 part. I am using about 0.6 dkh a day. Would kalk work for this amount of alk and ph?
Not enough to be noticeable with my refractometer. It's been steady at 1.025 SG since I set it up; I've added about 250 mL of RO topup water over the course of a week. The airstone (now removed) did double evaporation, but I threaded the line through the feeding slot in the canopy and had to scrub off salt every time I wanted to use the lights. I agree that the .1 rise wasn't worth it..1 doesn’t seem worth the hassle.
did the salt creep also affect your salinity?
Just tested it at 11.5, and it's been holding steady at that level. This is why I don't want to drip kalk...What is your alkalinity currently? If it's lower (7-9ish DKH), raising it to 10-11.5ish slowly over a number of days will give you a higher pH for a given indoor CO2 level. If you go that route, just make sure to keep your NO3 and PO4 slightly elevated as well to prevent tip burn on the corals.
That being said, unless your low pH in the evening is actually causing an issue, I'd probably just leave it where it is.
My Evo is just finishing its cycle, and there's just macro in it right now (along with a leather frag), so I'm not terribly concerned; I'd be much more displeased if this was a mature tank with these issues. Still, since the Evo has a closed canopy, and pH is low, it's best to look ahead at this point.It sounds like you're kind of just stuck where you're at in that situation then
If you really wanted to get tricky with it you could always look into installing a little hang-on refugium on a reverse light cycle.
How many ml of 2 part are you adding per day?