- Joined
- May 17, 2019
- Messages
- 2
- Reaction score
- 1
Hi
Just picked up the Max E170 with additional sump as a going concern and set up all good but struggling with getting the correct levels of water in the sump and rear sump. Last night I was able to get the recommended 6" in the sump return section and halfway between the overflow and emergency overflow in the rear sump this sat OK for a few hours but checking this morning I have lost about 3" in the return section and gained in the rear section to just below the emergency overflow. I have tried for quite a few hours of adjusting the inlet pipe and the flow of the pump but seem to be failing.
Any tips or is it just patience and playing with the downpipe flow/pump flow or both to get the correct flow between down and up?
Cheers
Just picked up the Max E170 with additional sump as a going concern and set up all good but struggling with getting the correct levels of water in the sump and rear sump. Last night I was able to get the recommended 6" in the sump return section and halfway between the overflow and emergency overflow in the rear sump this sat OK for a few hours but checking this morning I have lost about 3" in the return section and gained in the rear section to just below the emergency overflow. I have tried for quite a few hours of adjusting the inlet pipe and the flow of the pump but seem to be failing.
Any tips or is it just patience and playing with the downpipe flow/pump flow or both to get the correct flow between down and up?
Cheers