reef-pi :: An opensource reef tank controller based on Raspberry Pi.

[Freccialata]

The next step I wish to test is to add multiple temperature sensors.
Can I add a second (and maybe a third) sensor sharing the same pins and the same resistor, or I have to use different pins and other resistors?

 

[NeonRabbit221B]

Yup! Same pin/bus and resistor they will be addressed separately.

 

[Zippyfear]

Hive minds,
I just published reef-pi 3.3. Its a small release with an important bugfix related to ATO deletion. Other than this bugfix, this release also brings in @Michael Lane 's work on improved driver configuration UI and associated validation. Thank you @Michael Lane for your continued help. This was Michael's first significant go code (if i recall correctly), so I am super pumped about that as well :). Please give it a try and let us know.

Release builds can be found in usual location: https://github.com/reef-pi/reef-pi/releases/tag/3.3

cheers

When is the graphing for pH probe going to display the high and low axis vs 0-12? Just curious

 

[skywurz]

Hive minds,
I just published reef-pi 3.3. Its a small release with an important bugfix related to ATO deletion. Other than this bugfix, this release also brings in @Michael Lane 's work on improved driver configuration UI and associated validation. Thank you @Michael Lane for your continued help. This was Michael's first significant go code (if i recall correctly), so I am super pumped about that as well :). Please give it a try and let us know.

Release builds can be found in usual location: https://github.com/reef-pi/reef-pi/releases/tag/3.3

cheers

OMG!!! Thank You!!! i have been having a heck of a time with ATO and could not figure out why.

 

[robsworld78]

If you do anything to the pH would you considering changing resolution to thousands? :)

 

[Zippyfear]

If you do anything to the pH would you considering changing resolution to thousands? :)

What's wrong with 8.141458907043633 ?

wait.. now it's 8.141003371886666

I'd never have known it was decreasing.. it's hard to tell on the graph 0-12.. lol

 

[robsworld78]

What's wrong with 8.141458907043633 ?

wait.. now it's 8.141003371886666

I'd never have known it was decreasing.. it's hard to tell on the graph 0-12.. lol

Would like to see Atlas or PinPoint give that kind of precision lol.

I should have been more specific, it appears if you use ph-board driver you get trillionths but Atlas driver only hundreds. Would be nice to see an extra digit for that as it freezes on hundreds and you think it's not working or last digit is bouncing because it's rounding up/down every reading. Obviously not a big deal, only mentioned it because of your comment, if Ranjibs getting his hands dirty why not, either way I'm happy.

 

[Bigtrout]

3.3 so far so good and can delete an ATO now...nice work!

 

[Bigtrout]

Set up your adafruit feeds...you can set up graphs any way you want then.

 

[Ranjib]

We have plans to do a holistic customizable ui work.including the chart bounds as well as themes for the ui. But nothing concrete yet. I’ll keep you all posted. My current focus will be wrap up few drivers (Shelly and may be dli) followed by some other planned features for 4.0

 

[Zippyfear]

Set up your adafruit feeds...you can set up graphs any way you want then.

I've had issues with this in the past, and it still appears to not be working.. is it as simple as entering the username and secret key into Reef-Pi? How long does the feed take? Adafruit IO still doesn't show any feeds incoming.

 

[That Crusso Kid]

A little FYI...

https://www.tomshardware.com/amp/news/raspberry-pi-imager-install-raspbian-os

 

[Bigtrout]

I've had issues with this in the past, and it still appears to not be working.. is it as simple as entering the username and secret key into Reef-Pi? How long does the feed take? Adafruit IO still doesn't show any feeds incoming.

Username...secretkey...then RELOAD reef-pi.
Give it a few moments then go to adafruit and see if there are any feeds listed.

 

[Zippyfear]

Username...secretkey...then RELOAD reef-pi.
Give it a few moments then go to adafruit and see if there are any feeds listed.

Aww.. geez... reload. yeah, thanks! Works now!

 

[robsworld78]

Well I hit the Kickstarter button this evening, here's a link if anyone is interested.

 

[Michael Lane]

Aww.. geez... reload. yeah, thanks! Works now!

Reload gets me every time. It would be nice to prompt for reload any time a user makes a change that requires it. That kind of change is typically pretty low priority, but it could make a good entry level task for anyone interested in starting reef-pi/react development.

 

[Zippyfear]

Reload gets me every time. It would be nice to prompt for reload any time a user makes a change that requires it. That kind of change is typically pretty low priority, but it could make a good entry level task for anyone interested in starting reef-pi/react development.

ok, so.. I see all the metrics now in AIO, but they aren't getting any data for the feed.. thoughts?

 

[Michael Lane]

ok, so.. I see all the metrics now in AIO, but they aren't getting any data for the feed.. thoughts?

I haven't used the Adafruit feeds, but I think a common problem is using dashes, spaces, or special characters in the feed name.

 

[Bigtrout]

I haven't used the Adafruit feeds, but I think a common problem is using dashes, spaces, or special characters in the feed name.

Yes thats correct. Change to names with just characters and underscores.

 

[Bigtrout]

Also you.only get 10 free feeds on a free adafruit account. The extras after 10 will not show. My workaround was to set up reef-pi with the 10 metrics I wanted. Then setup adafruit. Get those feeds going...then setup the rest of reef pi and the extra feeds after the 1st 10 wont go anywhere but you will get the 1st 10.

As an example
I set up my 3 temp sensors, ph, 4 light pwm channels and the mem and cpu usage. Then i set up adafruit. After that I set up my temp controllers which are counted as feeds but since they were set up last they are feeds 11 ans 12 and wont show on adafruit
If i set up the temp controllers first they would take up 2 of 10 feeds. In other words feeds are set up first come.first served. So set them up in order..reload...check feeds and go from there