Don’t UI errors show up in the errors log? If so, what is the ”log” tab fir, this is the same question I asked last week. Mine has always been blank even when I get errors in the error log.
The error section under configuration tab is for serious /backend errors that should not be ignored. Things like driver failures, missing probes etc come up there.
Btw this is a bug that I have to fix , it’s not acceptable for reef-pi to crash due to this type of failure.
As I suggested you in your threrad, MQTT Explorer is a free software for Windows, MacOS, Ubuntu (debian, mint, neon, fedora, etc…) and Linux (almost every linux)... it's very easy and clean software to use.
The issue was reef pi error, not the lack of feed info. You can also sniff available feeds with mosquitto_sub from the command line with something like this:
mosquitto_sub -h localhost -u homeassistant -P password -v -t '#'
don’t get rid of it, use it to be an event log. Outlet on, outlet off, Dosed for 30 seconds successfully, etc, etc. with a time stamp, I think this would be helpful.
A dedicated field/actual volume calculation would be nice for sure, but in the meantime, why don't you use the name field for that? My carbonate doser channel isn't called "Alkalinity", it's called "Alkalinity 2s@33%=0.2ml"
That’s smart! I’m going to copy. I’ve kept a note on my phone but that’s a hassle.
Didnt realize you already did all the work with Robo-Tank, considering the Ezo is $40 alone the deluxe board is a crazy deal. Was going to be getting a Apex Lite locally for 175 until I realized it couldnt do 0-10V. Now i'm getting 8 power ports and basically a full Apex after I solder everything you give and plug my existing Ph sensor in. Cheers you just saved me tons of $$ and time :D
I have a spreadsheet that I use to fiddle with Dosing. I add all my calibration test data to get to what speed I want the doser to run and then I have a separate page to work out my timing for doses.
No. Currently reef-pi dashboard does not support multi channel light dashboard. If you model individual channel as independent light , you can get charts for diurnal and couple of other profiles
Good to hear, instead of pricing by the features I went by cost, components are cheap so why not give as much as possible.
Welcome to r2r. Can you share what you see in i2c detect and the driver configuration for pca9685 ?
I am interested too, I bought already a pcb with the MCP23017 about half a year ago, hoping it would be supported, I can do some testing to get it working.
