reef-pi :: An opensource reef tank controller based on Raspberry Pi.

[Ranjib]

Thank you very much! Upgrade went without problems.
I can't create a timer to switch pH on or off although.

9-8-2021 19:55:18

UI

ERROR

{"error":"Failed to create. Error: Invalid timer type: ph"} | HTTP 500

Bug :-/ . Thank you for reporting this . I made the fixes, will be resolved in next release. Let me know if you have any usecase for these, I'll expedite the release process then

(bug)fix time types for lighting and ph by ranjib · Pull Request #1522 · reef-pi/reef-pi

An opensource reef tank controller based on Raspberry Pi - (bug)fix time types for lighting and ph by ranjib · Pull Request #1522 · reef-pi/reef-pi

github.com

 

[Matt Carden]

I recently finished my reef-pi wiring and got it configured for desktop. I got stopped by the apparent problem that one has to use a PC to access pi via ssh? My question is can I access my Reef-Pi via Android?

 

[elysics]

I recently finished my reef-pi wiring and got it configured for desktop. I got stopped by the apparent problem that one has to use a PC to access pi via ssh? My question is can I access my Reef-Pi via Android?

Yes you can. There are plenty of apps for that, i use JuiceSSH

 

[elysics]

Yes. this is as expected and how it should work. It is intended to help in the layout of multi-panel dashboards. I do think we should remove the "Unassigned (blank)" text.

Oh alright. I personally preferred the previous bug that is now apparently fixed where if you chose to display a duplicate of the health panel it didn't show and there was just blank white background.

Are all panels in the future going to have that black border? Right now it's a bit of a clash between all the borderless graph panels and then the empty panel with a big black border

On another note, the historical temp graph now respects the custom range to the extent that the range isn't exceede by data, that's much appreciated, can actually read the graph now

 

[Matt Carden]

Yes you can. There are plenty of apps for that, i use JuiceSSH

Ok I must have been doing something wrong. I put my IP address in with the name I changed my pi to and the password I set for it. Then is tried using "pi"as user name and "raspberry " as password but neither allowed me to connect. I have a Pi thread: https://www.reef2reef.com/threads/matts-reef-pi-build-thread.745599/

 

[Raf714]

Bug :-/ . Thank you for reporting this . I made the fixes, will be resolved in next release. Let me know if you have any usecase for these, I'll expedite the release process then

(bug)fix time types for lighting and ph by ranjib · Pull Request #1522 · reef-pi/reef-pi

An opensource reef tank controller based on Raspberry Pi - (bug)fix time types for lighting and ph by ranjib · Pull Request #1522 · reef-pi/reef-pi

github.com

Create two ph controller with the sht31 just for monitoring, all the time. Other one uses the same sensor and control the fan based on values you desire. Next , use two separate timers, one to enable the second controller during day time and the then t
disable the second controller during night time .

That's what I wanted to do. Earlyer I tried it whith a timer and a macro but it didn't work neither.

 

[Ranjib]

Oh alright. I personally preferred the previous bug that is now apparently fixed where if you chose to display a duplicate of the health panel it didn't show and there was just blank white background.

Are all panels in the future going to have that black border? Right now it's a bit of a clash between all the borderless graph panels and then the empty panel with a big black border

On another note, the historical temp graph now respects the custom range to the extent that the range isn't exceede by data, that's much appreciated, can actually read the graph now

The black border is just a design mishap. I’ll get rid of it in next release

 

[Cristian2281]

Is it possible to allow decimal values for the Calibrate probe field in temperature settings? For Celsius users?

 

[elysics]

Is it possible to allow decimal values for the Calibrate probe field in temperature settings? For Celsius users?

Use dots, not commas

 

[DWKDiver]

Updated to 4.2. In UI. Scared me by saying 'loading for a minute.

Like the on/off dashboard for equipment.

Noticed that ATO graphs All have the same name, not the name of the ATO given. All are 'ATO Usage'. I have 3 graphs ATO Float, Skimmer Float and High Sump. All have 'ATO USAGE' as the graph title. BUG??.

Keep up the good work.

 

[DWKDiver]

Just wanted to give Rob's robotank board a big ole thumbs up.
Great board and super guy. Much easier than diy...I did both so I know.

Can't wait to see what he comes up with next!

 

[Ranjib]

Updated to 4.2. In UI. Scared me by saying 'loading for a minute.

Like the on/off dashboard for equipment.

Noticed that ATO graphs All have the same name, not the name of the ATO given. All are 'ATO Usage'. I have 3 graphs ATO Float, Skimmer Float and High Sump. All have 'ATO USAGE' as the graph title. BUG??.

Keep up the good work.

yes. Bug. I'll get a fix ready. Thank you for calling it out

 

[Cristian2281]

Use dots, not commas

Used dot, 25.5 - invalid value. I’m not sure whats wrong.

 

[elysics]

Used dot, 25.5 - invalid value. I’m not sure whats wrong.

Huh. Works for me

 

[DWKDiver]

4.2 update......

i had to pull the power plug and plug back in for it to work, after a waiting a minute for it to update. It just says 'loading'. Is that normal?

Also do we still have do macros backwards?

Fyi. I noticed when changing the number of graphs that the 'back/delete' button on the popup number keypad doesn't work. I think all the other popups work fine.

This is a very good update. Thank you for your hard work on this!

 

[elysics]

4.2 update......

i had to pull the power plug and plug back in for it to work, after a waiting a minute for it to update. It just says 'loading'. Is that normal?

Also do we still have do macros backwards?

Fyi. I noticed when changing the number of graphs that the 'back/delete' button on the popup number keypad doesn't work. I think all the other popups work fine.

This is a very good update. Thank you for your hard work on this!

I had the experience that if it hangs at loading, that that is the cached version in your browser talking to you, not reefpi. What happens if you press control+F5 at the same time?

 

[im_jeremy5]

I tried to update via the UI and recieved this error.

error":"Failed to update. Error: Unit reef-pi-install.service already exists."} | HTTP 500

Is there something I should do before I hook up a screen/keyboard/ mouse and install via terminal?

 

[Ranjib]

I tried to update via the UI and recieved this error.

error":"Failed to update. Error: Unit reef-pi-install.service already exists."} | HTTP 500

Is there something I should do before I hook up a screen/keyboard/ mouse and install via terminal?

reboot if possible.

 

[im_jeremy5]

reboot if possible.

That worked! Also, the main reason I was in this thread is I cannot get adafruit.io and Email notifications working simultaneously. Whichever I enter credentials for first works, the other gets forgotten on reload and doesn't work. Any ideas?

 

[Ranjib]

That worked! Also, the main reason I was in this thread is I cannot get adafruit.io and Email notifications working simultaneously. Whichever I enter credentials for first works, the other gets forgotten on reload and doesn't work. Any ideas?

Its not forgotten, secrets are not shown back by design. Its bit confusing UI, but they are preserved, so unless you are resetting it, they are set to the previous value, even if they shown as empty in the UI .