Reefer 170 pipes leaking

MrsBugmaster

5000 Club Member
View Badges
Joined
Dec 3, 2013
Messages
5,408
Reaction score
24,539
Location
Indiana
Rating - 0%
0   0   0
I have reefer 170 and one of the pipes under the stand is leaking. It is the main drain pipe. Here is a picture of where it is leaking. What part do I need to order to fix it?


679E4F45-A39B-46D5-A348-8242B09FA039.jpeg
 
It's the seal from overflow to sump correct?
 
When I was screwing it back on I did hear a little cracking sound so I stopped

It is leaking right in the middle of the red circle on the picture
 
You can get some primer and pvc cement to fix it, but that's a temporary solution and might cause a bigger problem later. I would just order a new head gasket from amazon prime. Will get it the next day.
 
They are called bulkhead, not sure what size you need but I would guess 1 1/2
 
I don't think you can put a regular bulkhead on the red sea reefer series tanks. they have a build in one.
 
I would just buy a whole new down pipe. The crack sounds like it can be a hardened gasket or the actual plastic nut cracking.

Screenshot_20191029-171821_Chrome.jpg
 
The leakis above that part.
And I replaced that part with a gate valve anyway. Got tired of constantly adjusting the thing.
 
I believe it comes with as a whole. Pipe/bulkhead nut and coupler/gasket. You can always contact them and ask them if they'll sell just the bulkhead.
 
Mine leaked initially in the same place, near the ring at the top. I put a silver sharpie mark on the down pipe for reference because when you tighten the bottom (ccw) it can cause the top to rotate, loosening the fitting in the tank. So hold or apply clockwise pressure when tightening the bottom fitting.

Same can happen if you push the drain against the glass, it will loosen the tank fitting. A fraction of a turn is all it takes.


If it cracked, yeah, you'll need the downpipe, i believe the parts are RSR42201 or RSR42208. 01 is emergency drain and 08 is the overflow.

If attaching your own gate valve on the bottom of the downpipe it is just the bottom fitting R42221 plus a 3/4 threaded adapter. Use ABS to PVC transition cement and thread on quick if doing that. No leaks at that joint. Dont use that up top though.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 11 36.7%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 10 33.3%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 9 30.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new