Looking for information on a handful of various return pumps for a remote sump that I'm planning to add to my tank.
Return line 1 will have ~4 ft horizontal run with ~3 ft vertical distance, add in some 90s.
Return line 2 will have ~8.5 ft horizontal run with ~3 ft vertical distance, add in some 90s.
One of the return pumps is going to feed a manifold that supplies 1. carbon reactor, 2. phosphate reactor as needed, 3. UV sterilizer.
Looking at the options for pumps that aren't outrageously expensive to do this.
Any input into the following pumps based on user experience?
A. Jebao DCP 15000 x2
B. Red dragon 3 (100W). The most expensive in my list. Would prefer not buying two of these if I can.
C. Vectra L2 x2
D. Anything from Sicce?
*Looking to stay away from external pumps at this point. Would put Iwaki pumps on, although I'm not too excited about 337 watts per pump continuously with the smallish Iwaki 70.
Return line 1 will have ~4 ft horizontal run with ~3 ft vertical distance, add in some 90s.
Return line 2 will have ~8.5 ft horizontal run with ~3 ft vertical distance, add in some 90s.
One of the return pumps is going to feed a manifold that supplies 1. carbon reactor, 2. phosphate reactor as needed, 3. UV sterilizer.
Looking at the options for pumps that aren't outrageously expensive to do this.
Any input into the following pumps based on user experience?
A. Jebao DCP 15000 x2
B. Red dragon 3 (100W). The most expensive in my list. Would prefer not buying two of these if I can.
C. Vectra L2 x2
D. Anything from Sicce?
*Looking to stay away from external pumps at this point. Would put Iwaki pumps on, although I'm not too excited about 337 watts per pump continuously with the smallish Iwaki 70.