Returning with 65g build

[drewcrew22]

Yeah, depending on how old the Biocube is, it can be hard to find parts and media baskets and things. But it can be made to work, I'm sure

Can you post a pic of the back filter section of the Biocube? @kevgib67 would you be able to offer some help please?

Thanks but it has been gone since February. I based my filtration on this YouTube video. I hope it helps.

Thank you so much.

Chamber one !

Chamber Two!

Chamber Three!

All together

 

[drewcrew22]

Thank you so much.

Chamber one !

Chamber Two!

Chamber Three!

All together

Chamber one he my protein skimmer, chamber two was set up like this video and chamber three had my UV.

Okay what skimmer do you have I was looking at the one below but not sure it’ll fit or so forth

 

[drewcrew22]

Hey guys quick update and seeking advice.

Tank is coming along well. Currently housing a pair of clowns, a pulsing Xenia, hermits, snails, emerald crab.

The advice I seek is two things I have hygger eco dc pumps (controller pictured)

At full power they are 1600gph I know a lot for a 32g cube. I need help with placement where I get optimal flow. It seems where ever I place them the Xenia gets to much and gets mad.


Secondly when I bought my cuc from my LFS it came with a copepod seeded sponge as the LFS said. I was told just place it in the back of the tank and let it be for 24 hrs. Now the second chamber of my biocube holds my rack that’s just got polyfil and some phosgaurd on it and my skimmer I was able to fit an icecap bio plate in there

I put the “seeded” sponge under it to sorta help things move into it per say now it’s right next to my skimmer, (sicce shark 150) if I turn the skimmer back on do you think it would have a adverse effect on the ice cap plate should there be any microscopic life on/in it?

 

[Fish Fan]

The skimmer shouldn't impact the 'pods on the seeded sponge. It will likely damage or kill a few, but many, many more will slip right through and into the display tank no problem.

As far as the circ pumps, I'm not familiar with that particular pump. I would encourage you to post these kinds of questions to the general or equipment sub-forums, you'll get a lot more eyes on your question in those forums

https://www.reef2reef.com/categories/general-aquarium-discussion.317/

https://www.reef2reef.com/categories/equipment-discussion-for-saltwater-and-reef-aquari.744/

#reefsquad may have more info on those circ pumps.

 

[Rocks reef]

You may have to get a smaller circulation pump if you feel the current one is too strong. Have you turned it down all the way?
Xenia are very resilient, I wouldn't worry about damaging it.

 

[drewcrew22]

Bristle worms

It appears I have a very booming population of them in my tank in various sizes. Can too many of them pose a danger to any of the inhabitants or are there any risks to them if the population gets to great

 

[drewcrew22]

So found the same 65g tank as i originally started with on marketplace for free so I’m working on getting it plumbed now.

It has a herbie style overflow. This is my first time doing any type of hard plumbing for a tank. It’s 1” bulkheads with 1” drains and 1” return. My question is does it look like I set the drains up properly?

 

[drewcrew22]

All finished just need to glue it all, before that I wanted to get opinions on anything I missed.

 

[Fish Fan]

All finished just need to glue it all, before that I wanted to get opinions on anything I missed.

Post this question over here, you'll get more eyes on your question there:
https://www.reef2reef.com/forums/general-equipment-hardware-filtration.30/